Thanks:
0
Dislikes:
0
-
Technician
- Rep Power
- 2
664-01 code
Greetings. please i need in clearing SC 664-01 on Ricoh MP5503. the machine literally comes on but that's just all, no noise from any moving block or roller from inside. with this code on the display board, no other function or operation can be carried out.
-
Re: 664-01 code
It is covered in the service manual.
-
Re: 664-01 code
i agree with slim..... though i am not finding that model of ricoh on the tsrc website. and it is not in my list of already downloaded materials. good luck
-
Re: 664-01 code
As per manual ....Description:ASIC on the IOB SRAM program expansion error. Access permission error to ASIC on the IOB SRAM (write permission fails)
Causes: • Noise • Hardware problem
Remedy: • Replace the imaging IOB and paper transport IOB • Check the harness....
(let's not confuse we are talking about MP C 5503) First of all a toner chip could also be faulty, clean the chip reader as well.
-
Junior Member
- Rep Power
- 0
Re: 664-01 code
You can turn off the machine completely, wait for a few minutes, and then turn it back on. Sometimes a simple restart can resolve temporary glitches.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks