Put the {.ehd} file in the root of your flash drive.
The firmware files (.hds} can go in a folder.
Your machine should be asking for hard drive repair or hard drive check.
Plug in your usb drive
4.4.6.8. System Recovery
• Service Functions > System Recovery
This function repairs or formats the HDD of the system. To use this function, a HDD image need to be saved in a USB
memory, and that USB memory needs to be plugged in the system before the execution.
From the system recovery UI, Choose “SYS” to recover only the system partition of the HDD or “ALL” to recover all
the partition of the HDD.
When the system recovery UI is appeared after reboot, choose “HDD Repair” to repair any corrupted data in the selected
partition or choose “HDD Format” to format the data in the selected partition.
The password of this mode is 1934.
4-40
4.3. Updating Firmware
This chapter includes instructions for updating the printer firmware. You can update the printer firmware by using one
of the following methods :
• Update the firmware by using the printer control panel
• Update the firmware by using the network.
4.3.1. Updating from the Printer Control Panel
WARNING
Failure to follow these instructions could lead to corruption issues and prevent the proper operation of this printer. Follow
all of the instructions carefully.
1) Download the firmware file from the Global Service Partner Network (GSPN) website.
2) Unzip the firmware file to a folder on your PC.
3) Copy the firmware file (*.hds) to a USB flash drive.
NOTE
The firmware files may be up to 500MB in size. USB flash drive size must be a minimum of 2 GB.
4) Press the button on control panel in this order. (Others > Application Management > Application > Install)
5) Plug the USB flash drive into the USB port. “Install” button will be activated on the Application tab. Press the “Install”
button.
Copyrigh
Bookmarks