Samsung MultiXpress X7600

[Reed]

Was wondering if anyone had the Recovery files for this machine. The screen displays "loading" and nothing else happens. (The recovery firmware is different than the firmware found on the HP/Samsung website.. correct?)

[rrrohan]

https://1drv.ms/u/s!Ah_79nptMOdwgYY8...8V9_g?e=7h9ScO

i assume you know the procedure

imo you should also change the HDD

[Reed]

I have the manual. So I hope that explains everything

[rrrohan]

Just power on with RHS door open while holding control panel button from memory gets you to the boot menu. Been a while since I've done it

Sent from my Pixel 4 XL using Tapatalk

[Reed]

yea, I think that is how I accessed it the other day

[rrrohan]

id highly recommend installing another 320GB hdd

almost every Samsung i have serviced needed a HDD replaced at one point in its contract period and its likely whats causing the need to reflash the recovery firmware and for the extra 5 mins its worth doing imo.

but i never was able to confirm this but i believe hdd needs to be 320GB so if thats true you wont be able to buy one but ive used 2nd hand ones out of Konica Minolta copiers without any problems in the past

[Reed]

id highly recommend installing another 320GB hdd

almost every Samsung i have serviced needed a HDD replaced at one point in its contract period and its likely whats causing the need to reflash the recovery firmware and for the extra 5 mins its worth doing imo.

but i never was able to confirm this but i believe hdd needs to be 320GB so if thats true you wont be able to buy one but ive used 2nd hand ones out of Konica Minolta copiers without any problems in the past

Thanks for your help. I have a couple extra Konica Minolta HDDs. I'll take one out

Sent from my SM-G955U using Tapatalk