Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Service Manager 1,000+ Posts
    Samsung K3250 NR Multixpress ;wait, initialization in progress.

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Samsung K3250 NR Multixpress ;wait, initialization in progress.

    The customer brought me this machine after updating the firmware with a USB stick, a procedure suggested by Samsung but I think it was not successful. The machine is without hdd, when it is turned on it signals "initialization in progress, waiting" and it always remains so, the initial settings appear in the background. I can enter the web but it doesn't accept login with "admin" and "sec00000". I can print correctly. I'm not sure if the firmware upload was successful. I opened the firmware in a pendrive and inserted it on the side of the keyboard, then I turned on the machine by holding down the on / off key and "firmware ready for updating" appeared, but then the loading does not continue and the machine restarts. Any suggestions welcome on the correct procedure, thanks.

  2. #2
    Junior Member
    Join Date
    Oct 2021
    Location
    Valais
    Posts
    2
    Rep Power
    0

    Re: Samsung K3250 NR Multixpress ;wait, initialization in progress.

    Similar issue there, restarting few moment after "firmware ready for updating" appeared.

    Did you find any solution ?

  3. #3
    Service Manager 1,000+ Posts
    Samsung K3250 NR Multixpress ;wait, initialization in progress.

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: Samsung K3250 NR Multixpress ;wait, initialization in progress.

    Quote Originally Posted by edhellweiss View Post
    Similar issue there, restarting few moment after "firmware ready for updating" appeared.

    Did you find any solution ?
    Unfortunately I have not solved the problem, the customer uses it only as a printer. But I'm tempted to call him back to find out if he called back Samsung

  4. #4
    Junior Member
    Join Date
    Sep 2021
    Location
    DG
    Posts
    1
    Rep Power
    0

    Re: Samsung K3250 NR Multixpress ;wait, initialization in progress.

    recorvery system (Use Usb1394 cable & Pc ) usblist2.exe

    update Firmware (that machine made before 21.06.01 , update V3.00.11 firmware // made after 21.06.01 , update V3.00.14 firmware)

    not solve problem . replacement MainPcb (JC92-02831B)

  5. #5
    Junior Member
    Join Date
    Oct 2021
    Location
    Valais
    Posts
    2
    Rep Power
    0

    Re: Samsung K3250 NR Multixpress ;wait, initialization in progress.

    Quote Originally Posted by NPC5 View Post
    replacement MainPcb (JC92-02831B)
    Solved the issue ?

  6. #6
    Junior Member
    Join Date
    Jan 2020
    Location
    baz
    Posts
    6
    Rep Power
    0

    Re: Samsung K3250 NR Multixpress ;wait, initialization in progress.

    I have the Samsung K3250.
    The machine starts, but the display freezes. only the Samsung logo is displayed.
    I can print on it, I can access it from the network (IP address).
    Sometimes you hear it restart.
    Firmware update does not help.

  7. #7
    Senior Tech 250+ Posts
    Join Date
    Jul 2014
    Location
    Birmingham
    Posts
    279
    Rep Power
    23

    Re: Samsung K3250 NR Multixpress ;wait, initialization in progress.

    Quote Originally Posted by kgv1 View Post
    I have the Samsung K3250.
    The machine starts, but the display freezes. only the Samsung logo is displayed.
    I can print on it, I can access it from the network (IP address).
    Sometimes you hear it restart.
    Firmware update does not help.
    Print configuration page to check if UI f/w is installed.

  8. #8
    Junior Member
    Join Date
    Jan 2020
    Location
    baz
    Posts
    6
    Rep Power
    0

    Re: Samsung K3250 NR Multixpress ;wait, initialization in progress.

    Quote Originally Posted by Jack79 View Post
    Print configuration page to check if UI f/w is installed.
    I printed it out.
    The firmware UI line is empty. But it is also empty on an older configpage.

  9. #9
    Junior Member
    Join Date
    Feb 2022
    Location
    R...
    Posts
    4
    Rep Power
    0

    Re: Samsung K3250 NR Multixpress ;wait, initialization in progress.

    Quote Originally Posted by NPC5 View Post
    recorvery system (Use Usb1394 cable & Pc ) usblist2.exe

    update Firmware (that machine made before 21.06.01 , update V3.00.11 firmware // made after 21.06.01 , update V3.00.14 firmware)

    not solve problem . replacement MainPcb (JC92-02831B)
    Can you please share these firmwares?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here