The customer brought me this machine after updating the firmware with a USB stick, a procedure suggested by Samsung but I think it was not successful. The machine is without hdd, when it is turned on it signals "initialization in progress, waiting" and it always remains so, the initial settings appear in the background. I can enter the web but it doesn't accept login with "admin" and "sec00000". I can print correctly. I'm not sure if the firmware upload was successful. I opened the firmware in a pendrive and inserted it on the side of the keyboard, then I turned on the machine by holding down the on / off key and "firmware ready for updating" appeared, but then the loading does not continue and the machine restarts. Any suggestions welcome on the correct procedure, thanks.
Bookmarks