Samsung C9301 hanging on logo

[Jack79]

i am trying my luck remotly to get the firmware loaded.
the ipset app did allow no to get the ip and i reached the syncthru page.
seems like someone changed the default admin password from the default sec00000...
anyway around that with to try a reset with no screen and no admin access on syncthru?

Password is set during first setup so if your customer does not know it (probably lost or forgot because printer was used via usb cable) then you won't be able to load firmware via web page. In this case you need replacing control panel (even from another working machine).

[allan]

Password is set during first setup so if your customer does not know it (probably lost or forgot because printer was used via usb cable) then you won't be able to load firmware via web page. In this case you need replacing control panel (even from another working machine).

Thanks. Its not a common machine around here and the suppliers can not help with a replacement. My hope here lies with finding the previous owner or a used panel.

[wav]

HI on the samsung displays there are a small micro sd card that has some data on it.

and you can reset the machine in service mode.
just pm me for details