I have not gone to this machine yet. Was hoping someone knows what could be the issue with it.
Its just staying on the starting screen with the Samsung logo on it.
Thanks.
I have not gone to this machine yet. Was hoping someone knows what could be the issue with it.
Its just staying on the starting screen with the Samsung logo on it.
Thanks.
Whatever
Typically on that series it means you need to replace the control panel. If you can see the web browser when connected through the NIC that will confirm it.
Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?
I've never been able to recover a screen. I've tried updating f/w through the web browser but it never resolves the issue. So I can't really say what the root cause is. Samsung (unlike other manufacturers I've worked on) seems to run a dedicated operating system on their panel that is separate from the main copier OS. To me, it seems like an odd way to do things. I would think a control panel should operate like a computer monitor - just a display, not any OS. But what do I know? I'm just a field tech.
Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?
Try reload firmware first. If this not helps you need replace control panel . I got this issue on 4 machines and 3 were recovered with reloading fw (so connecting to Web interface does not mean in 100% that op need replacing), 1 printer needed control panel replacing.
Tried to find the machine IP with an IP scanner(common ranges only) with no luck. The customer used USB to print and that still works. The panel is just useless. Is there a way to reset the network settings in this state or can the firmware be installed via USB or the USB printer port?
Whatever
I did find a tool called SetIP. Busy checking that out now.
Wondering if its not hanging due to a network configuration issue.
Whatever
i am trying my luck remotly to get the firmware loaded.
the ipset app did allow me to get the ip and i reached the syncthru page.
seems like someone changed the default admin password from the default sec00000...
anyway around that with to try a reset with no screen and no admin access on syncthru?
Last edited by allan; 02-04-2023 at 12:18 AM.
Whatever
Bookmarks