clx 3280

[Norvenmunkey]

have a samsung clx 3280 that constantly locks up screen , wont scan or screen un responsive. have done hdd recovery via usblist programme and updated
firmware. Machine works ok for a couple of weeks. then it all starts again

[wav]

Re: clx 3280

have a samsung clx 3280 that constantly locks up screen , wont scan or screen un responsive. have done hdd recovery via usblist programme and updated
firmware. Machine works ok for a couple of weeks. then it all starts again

When you did the firmware did you use the same hdd as that could be a fault.

Sent from my SM-G998B using Tapatalk

[Norvenmunkey]

Re: clx 3280

Hi. Machine has had Hdd replaced. Error came back short time after.

[wav]

Re: clx 3280

Hi. Machine has had Hdd replaced. Error came back short time after.

Is the machine a Samsung multi press sl x3280 not clx

Sent from my SM-G998B using Tapatalk

[Norvenmunkey]

Re: clx 3280

Yeah sorry its a sl x 3280

[wav]

Re: clx 3280

hi ill have a check on the ftp site for more files or any patches.
i will update to asap

[Norvenmunkey]

Re: clx 3280

That would be great. Someone did mention to me
It was possible it could be the ops panel causing the problem.

[wav]

Re: clx 3280

it could be.

if you power off the machine and hold 0 it should boot to control panel calibration - see if that may help - im still checking on the files.

[achegete]

Re: clx 3280

Hello, I am looking for the firmware to do the recovery of the same SL-X3208 machine, maybe you could send it to me or upload it to wetransfer, thanks

[wav]

Re: clx 3280

Hello, I am looking for the firmware to do the recovery of the same SL-X3208 machine, maybe you could send it to me or upload it to wetransfer, thanks

Pm me

Sent from my SM-G998B using Tapatalk

[Norvenmunkey]

Re: clx 3280

it could be.

if you power off the machine and hold 0 it should boot to control panel calibration - see if that may help - im still checking on the files.

hi sorry taken so long to get back. tried panel calibration, all seems to be good. thanks.