I use toner for Samsung. Static-control - SAMPOLYT- 90gr.
It work for many Samsungs - ex. M2020 and Xerox as well.
Type: Posts; User: aazim
I use toner for Samsung. Static-control - SAMPOLYT- 90gr.
It work for many Samsungs - ex. M2020 and Xerox as well.
Same situation here.. ended up with encoder disk on exit belt - broken clips end fallen down from the axle.
A little glue work for me.. yes in SM all check work but may be it looks only home...
KeepItPrinting.com :: Index
Missing charge.Probably torn charge wire
Bizhub 754. Total counter - 1 231 000. Replaced Developer and drum units simultaneously. Both new, OEM, in boxes. After switch ON - Drum unit counter was reset 0M/100% , Developer unit counter-...
This is from other post for other Bizhub but it sound like my case
Re: Konica Minolta C280 Not Printing
Glad to hear you fixed it.
When you do an all clear the HDD is unset, simply go back in...
I must perform "clear all data" on my Bizhub 754 but i don't have *.tar movie data file to upload after.
Can somebody here help me? I'll be glad if i have and a firmware for this model.
Thank you...
Try with cleaning of the rear side thermistor TH2 ( which is in contact with fuser roller). If not help - replace it. This solved my c-3503.
For me overheating fit everything you described. As a rule the high temp causes toner sticking over fuser roller. I know BH 600/750 but I think BH 601 have the same body and service mode. I have...
Toner on "entrance plate" for me is not enough adhesion of the toner on paper. Check the transfer and humidity of the paper. Switch ON the dehumidifier (up on the power cord). I have experience with...
It's correct.. my mistake
Thank you 'blazebusiness'...
Wish you peace and love...
the smallest things make us great...
Solved.
I tried to get the machine to work with non-original toners. One who tore my life was original, but HP 9055 (which is actually Di650). Tried also 2-3 unknown brands, but labeled as BH 600 -...
Hi colleagues,
I need the part numbers of feed and separation rollers of DF-604 on BH 600/750.
I'm not a KM technician and have part manual only for the main body.
I appresiate any help.
Best...
All starting with my battle about over toning. I read and test everything I find about over toning, dumping etc. for this model. Grounding the drum, changing dpSW 32-0, 32-2, 05-0..
Then put a new...