Search:

We had some that tested okay in a caddy but would not work in the machine for whatever reason. You could read and write ok on the computer however.
Seems to mostly work great to clean the drive in...

Have Konica released any special firmware to make the 4e able to use AirPrint reliably on the latest iOS? Seems to be the last 3-4 stack updates for iOS have made AirPrint mostly impossible. Constant...

Cracked end block probably, they leak. Sand and clean or replace charge grid. Replace with new end block and fit and tap with plastic screws to stop the problem from reoccurring. Well that is until...

Fans are a problem. Take the older model fan and cut the wires and re solder/splice. Problem gone.

developer kit parts, also harder auger flag cuts into ats lol.

Those ridiculous coated charge...

Possibly print head unit. They are at this age where there is some weird faults. Check there is any image on the drums and itb. We have had print head units go bad that do not throw an error on the...

They are different the assembly, well here anyway. We attempted this years ago and it was not interchangeable. I cannot remember what the difference was now sadly.

Hi all, very interesting one. I myself didn't attend it was other tech's, 3x of them so far... I'm expecting to go there next week, I'm in a different city...

MC: Develop Ineo+ 759 Problem...

I’m no expert but we had a C284e that had a Very similar looking issue. It was the HV board in our case.

can you take a photo of level history and table number reading? Maybe this helps

We just use that old one dating back to the C203 which I think a lot of the people know already, doesn't do everything I guess but helps us with i-option issue's when machines come in with no HDD or...

I'm not sure as we had the TPM issue as a result of trying to get rid of the i-option inadvertently. (we clearly know enough to get in to trouble lol) The battery never went flat. It did say to...

Was it having the rainbow prior to your service work? Sorry I don't understand this.

Assuming it did not have this but this model has issues primarily with charge levers and the original part...

Haha well it was not intentional :D, we definitely do not want a zero meter. I can happily PM you the steps to get it to this point if you really want, it's confusing as we have literally done this a...

Hi guys,

There was a C364e we had come in and there was an issue with an i-option, the techs reset it and disabled by using the serial hack procedure since we don't have access to LMS. Machine had...

Its very easy to do but I forget he exact procedure we have only done it once. You will have to use multiple service menu modes. There will be some playing around to do it in the right order. There...

you can use the simplified method of just using the internet clients outgoing mail server address and inputting this in smtp client and server. works 99% of the time as long as its not being flagged...

Check the wiring harness, if not I would be skeptical of epu connector, might pass the check but can still be damaged.

Jay

Get a new a new HDD don't bother with an old used one.

C3 -> ON: Perform 1 - 3

49 -> ON: May as well update all

08 -> ON -> 690


You can buy the firmware online maybe from Justmanuals...

3C ->ON -> 3

49 -> ON -> 4

If the problem still is there you may need another HDD but I doubt it.

Jay

Their is setting for the number of sheets prior to next cal, but I doubt that is it. Try reloading firmware and formatting HDD and running initialization and gamma adjustment. We have had a lot of...

Just set 08-556 / 557 to 0 then if you don't want anyone else printing anything in color set as department code

These are a great machine but the key is in the servicing IMO, it should be done for all machines but these are more critical.. Vast majority of the machines for us that we have in the field have not...

(08) 9081 sorry .. not 9091

(08) 9091 is initialization of department management information so that should reset what you are after?

Check the value of (05) 390/391 for any abnormality, or does it generate C390 code? I would check this first as have had a couple of corrupt machines before where the count was at ridiculous readings...

4+8+9 -> ON