Apart from the manual cleaning procedures these print head(s) pretty much look after themselves.
All you can really do is print off a bunch of full coverage black prints and hope the nozzles unclog....
Type: Posts; User: Cipher
Apart from the manual cleaning procedures these print head(s) pretty much look after themselves.
All you can really do is print off a bunch of full coverage black prints and hope the nozzles unclog....
Looks promising, I'll let you know.
https://i.ibb.co/HCRRpjp/20200726-114359.jpg
Collected this finisher from the customer on Friday and brought it back to the workshop.
Of course I have what is says below as a starting point.
Just thought I would ask for any additional...
Managed is just a cheaper band of pricing for HP partners/dealerships.
XC = high yield contract ink cartridge.
But I think you can use any compatible HP ink retail cartridge (they will just...
I could remote on to a PC on the same network as the MFD and take a look if you like.
The Fast Remote Desktop Application – AnyDesk
https://i.imgur.com/3jzgqVy.png
PM sent.
15.B1.A - Is a paper jam / mis-feed
Take the tray out and check the white plastic bearing on the pickup shaft at the rear is seated correctly.
You should get 3mm to 5mm of left-to-right...
PM sent.
System Settings > General Features > Function Priority
- Specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.
Default:...
Email sent.
SR3220 SM & Parts (6.3Mb)
PM Sent
I wouldn't normally touch a Kyocera with a barge poll, but hey it's to help a mate out so... I'm after:
Service manual
Parts Catalogue
Bulletins
Latest Firmware
Ricoh, Sharp, Canon and HP......
Not necessarily.
Canon's default position for the ITB motor may not be optimal.
Every machines frame and positioning is slightly different.
I've swapped ITB units out of working machines and...
Canon machines for the most part have good built quality and the software eco system is very mature and stable (everything just works).
Print quality is solid and consistent, most parts easily...
The transfer belt tracking can be somewhat 'temperamental'.
Normally it can be fixed by adjusting the ITB motor position up or down a notch -or- lowing one or more floor support feet which...
MEAP (Multifunctional Embedded Application Platform) is Canon's java based application platform, it is a integrated part of the operating system.
To get something installed you normally just need...
-Yes
-30 minutes or so
You can get a ping response and the scan to email is working.
So that indicates that there is wireless connectivity via the router.
I assume that you can also get to the Web Image Monitor from a...
You have to be kidding me... really mahahaha.
Scrap what I posted.
I was not aware Ricoh USA had modified their Greenline 02' range to take a different toner formula.
Well I didn't know that.
The USA modified their MP C3002/C3502 Greenline range to take a higher melting point K toner formula.
Interesting, wonder why they decided to do that?
Fusing...
Possibly something to do with image transfer roller.
(The black foam roller inside the machine opposite the AIO drum).
Make sure it's spring loaded both sides and not lob sided.
It can be...
Does it also have this stuck to it lower down?
(Customers think they are so damn smart... like we have not seen that hundred times before).
...
841735 Appears to be the correct K toner EDP for your geographical location and model.
Black Print Cartridge MP C3502 | Ricoh USA
842201 Has me confused, I do not know what P and RM is referring...
Hmmm.
Apart from scrubbing up the rollers and replacing some PF sensors there isn't much else that I can suggest.
There is the sub scan (feed) encoder disk and sensors as well.
Good luck.