My bad, here is the pic:
http://img685.imageshack.us/img685/3426/okipartneeded.jpg
Type: Posts; User: HmkPrinterTech
My bad, here is the pic:
http://img685.imageshack.us/img685/3426/okipartneeded.jpg
Hey all,
Anyone have the PN# for this part?
http://forums.clubrsx.com/attachment.php?attachmentid=339726&stc=1&d=1271856423I
I have the part in hand (I robbed Peter to repair...
I second the suggestion of wiping the printheads. Should always be done when installing a new MK.
Well, got it figured out. The covers that are supposed to swing open to expose the LED write heads was not opening due to a broken gear.
Something to check for in the future.
Jeff.
Ah, I see now. ;) Not sure what could be causing you particular problem.
Awesome! Grats Nathan! :)
I support a few of these models, and I have checked everything that the service manual suggested short of replacing parts. All of my experience is with HP and Kyocera printers. I know when you have...
If these are vertical lines, I am guessing that you have a dirty Drum charge roller. This is a common problem. Clean the charge roller with water and a mild detergent (I went to Walmart and got a...
This is a voltage issue with the main charger. A build up of toner will cause a short. About a 50/50 chance a new charger will fix it. Replace the drum if you still have unacceptable output.
Do the LEDS cycle like this pic?
My guess is the LED Relay board has gone bad.
Thanks for the reply BC :) I was just wanting to see if Kyocera had a tech bulletin on this as a known issue.
I have replaced the fuser assembly on one of the units, but the problem persists. The...
Hey all,
Hallmark has several FS-4000's the pop a "Call Service 6000" error on print jobs longer than 100 pages. We have moved the printers power source, and even removed the printers off-site,...
"Maintenance Advised" is the message that the plotter is displaying. I already installed the maintenance kit, and reset all of the eeprom counters fromt he service menu, but the message is still...
Hey all,
I have a Designjet 500PS plotter that I have just replaced the maintenance kit on. I have reset all of the eeprom counters, but this message is still showing ont he front panel. Any...
<---- 18 years
Ever since that customers HP Laserjet 2 in '90 "that had to get working!!!". Since then I was hooked. :)
Wow! Spray n Wipe. I think I'll use ocean fresh. :)
Thanks agian! Jeff.
Sweet! I was hoping I could somehow clean it instead of just replacing the charge rollers.
Mild soap and water? So I can go in the restroom onsite and use the handsoap to clean it?
Thanks...
Yes, most of these printers are in the Manufacturing plants where the cards are made. Very dusty conditions.
Is it possible that you could send me the pdf on the tech note? or anything else...
Hallmark is having a rash of charge roller failures on the 4000 printers. I cannot get to KMAConnect to see if this is a known issue, or if there is a way to clean the roller to prevent black...
From what I can tell, they are one and the same.