This might be helpful,
https://support.microsoft.com/sv-se/help/4517211/windows-10-update-kb4517211
Check known issues in this update
Type: Posts; User: lilleputte
This might be helpful,
https://support.microsoft.com/sv-se/help/4517211/windows-10-update-kb4517211
Check known issues in this update
How does the image look at the drum if you do a forced stop ?
Check the Bushing under the lamp assy
A161271000
Copier - Option - FNC-SW
D-DLV-BK / CL
I think this will help you.
Have seen this problem plenty of times.
Replacement of this hvt use to solve "insert drum message"https://uploads.tapatalk-cdn.com/20190109/1994eb98ff95fc60a791731ef83d9ad7.jpg
My guess , this is a transfer related problem.
open it up and inspect
The 52 series have DOD wipeout.
This is located under initialize all data/ settings then choose DOD.
Skickat från min SM-G930F via Tapatalk
If possible try PCL or PS instead of UFR
Skickat från min SM-G930F via Tapatalk
Maybe a stupid question
Wich printer driver are you using ?
No.
You can uninstall it , no problems with firmware.
Skickat från min SM-G930F via Tapatalk
Have you tried a full-calibration?
You can also adjust the Color balance
Skickat från min SM-G930F via Tapatalk
Hi,
Does anyone have firmware for this ?.
Before Xerox had DLM files on the website and you created a folder on the usb called "altboot" , but cannot find the DLM file on Xerox website.
...
Is the,,, Short Connecter (jumper) installed ?
Try this
COPIER > FUNCTION > MISC-P -> DV-RT.
Caution
If using frequently, deterioration of developer or toner scattering
might occur.
W/SCNR put to 1 ?
tried update firmware ?
Perfect , we did turn the heater on and then the white "dots" are gone :cool:.
We did change the Primary Transfer Roller but with bad result ( still white dots )
Thanks alot for awesome...
Hi ,
We will remove everything and deep clean the machine.
I will return with a answer on Monday. Have a nice weekend :cool:
Hi , i'm struggling with this 1135+.
White dots on PG7.
Actions so far
1. Cleaned paper feed path from paper dust.
2. Changed itb / primary transfer roller
COPIER > FUNCTION > CLEAR
Option or card, if i remember correctly
Hi.
Is it possible to print A3+ from the bypass tray ?
According to the specification, it should work but not in reality
The A3+ is not fitting into the bypass tray
/lilleputte
Do you have any oil mark (warning) at the upper right area of the basic screen ?
Call for a tech then
someone who knows what it's all about
/lilleputte
If you have Buffer Pass Unit-G1 installed but no finisher.
1. COPIER > OPTION > ACC
2. IN-TRAY to "1"
3. Paper output settings
Output Tray Designation - Canon imageRUNNER ADVANCE...
Hi. Try this
COPIER > OPTION > LCNS-TR
Put ST-HDCR2 TO "0"
I know it may take time for the machine to boot, but 1 hour sounds strange
Speak with the it department on the company
Maybe some kind of network reset will resolve this issue ?