I suppose, but the 4 and 8 series has no shutter??
Type: Posts; User: pappyvonsillypants
I suppose, but the 4 and 8 series has no shutter??
call me crazy, but why not just remove the upper shutter? The c368 waste has no shutter!
would this cause an issue?
has anyone just removed the shutter to see if it works?
I will try myself,...
Ok A buddy got the part # A2XM623000 Dumper is what it is called. so if the tray slams down or your wires keep acting up this is the fix! hope it helps someone!
Hello, 1st time caller long time listener. I am in search of a part number for the break or torque limiter what ever t may be called. YES I have the parts manual. it appears what i need is not in...
the board is my next step! Unfortunately the customer owes us a bunch of money so I am not going back out until they pay up.
After doing some digging in manual etc, I am going to bring the board....
any resolution to this??? I am having same issue!
Hello, within 4 days of each other I have gone to 2 separate accounts with j7216 jams. On both occasions I have found that the hole punch pin on the finisher front side was bent as well as the...
I found it and will try this I appreciate it!! Vielen Dank, dass Sie ein Lebensretter sind
Hello by universal driver what do you mean?? i am a tech of 16 years and know my way around a machine etc... but where is that at on knoicas site? also i took my laptop and crossed over and still...
yes i had updated the driver to the new one. firmware is up to date as well... i m having their i.t. delete everything from server and pcs to start fresh in 10 minuetes i will update with any info. ...
Re: Bizhub C284 Login Error when authentication and account track are turned OFF
http://www.copytechnet.com/forums/images/misc/quote_icon.png Originally Posted by KM7155...
KM tech 16 years.... I have a c3850 with transfer belt stuck. not sure how to go about it. i guess i can pull the whole thing apart. However I'm sure there is a way to take it out with less...
So what was the final outcome? is it fixed, and if so what was the fix??
To reset the fuser and belt on this model u have to go to counters and it has a tab that states "new release" highlight that and open and shut the front door and hit the start key to reset. it was an...
Hello i have a biz 950 that every so often the finisher exit tray drops all the way to lower limit for no reason. When I flag the exit sensors they stick. the sensors actuator has no springs and...
by lowering the finisher trays all the way to lower limit and turning on machine it should find home. if you go into service mode and run the trays up and down the code should not return. If it does...
I am interested in changing the boot screen as well.... can i get the file and instructions by chance? i have been woking on km for 12 years im no idiot, just lazy. any help would be greatly...
I have been a tech for 12 years. only on here for a tid bit. when you pull the toner bottle out there is a chip at the bottom in which the machine reads. the "reader" if you will, is a few metal...
Is it giving a j21 code? if you are not seeing any issues with the claws its the trans sep unit. to be sure add an extra wrap to the springs on the pickers of the drum to ensure their tension.
for the 93-01 i would try swapping the motors in the adu. or it could possibly be a sensor in the adu as well not flagging. its a mess swapping out the motors but it will provide a great test.