Search:

These types of ghost prints are usually created in the imaging unit and/or the fusing unit.


It doesn't seem like it but it could be incompatibility problems
If you haven't done it try this

...

Yes it does
but please make the donation process easier.
Maybe when you start a new thread,
on this page add a button to donate.


I have been registered here long ago and I only recently...

You was right replacing the CCD assembly fix the problem.
Thank you !!!

Thanks for your answer Markks
checked the connectors and cables twice, everything seems normal,


I'm going to replace the CCD and post the result.
If you come up with another ideas, feel free...

I hope someone has had this problem and can help me find the problem.
Copy quality is fine, printouts and printings too.
Suddenly for no apparent reason the copies look very bad (see attachment)...

It was my argument with the client, the origin and quality of the kit was doubtful.
1.- Trying to install it was going to cost an additional 2 to 4 hours of labor, without guarantee.
2.- Install TP...

Short history:
the customer bought the UK-212 Upgrade Kit at walmart, then the one who sold them the copier installed the kit but couldn't get it to work.
A client of mine recommended us to them....

In Service mode + 2nd network settings Wire Wireless (Primary mode was selected),
SSID information are 12 alphanumeric digits.

I don't know what setting you need to adjust in authentication...

copyman thank you for the post and attachment



Thank for your tesponse

I think so but IP was wrong ( no connected to Router) and manually assigned an IP address, DG and SM, still no ping...

Need help to setup wireless on Bizhub C 458.
Card K212 Is installed bit can't ping it.
Is there am Easy step by step troubleshooting guide
Un services mide Is wired AND wireless check Mark
Amy...

Please send me the password. Tx.

Next time I will try it (Firefox)
Thank you for sharing

Update

the service call that start this thread was cancelled but today I got a new service call from another customer to update his list of users.
and it was a Bizhub C353 again, same problem web...

Thank you all!!!

I got an schedule for Monday 'll let you know

I got a service call to do scanning setup on Konica minolta BIzhub C353
Everything is working, copy quality is fine printing is OK. but..
Trying to get into the copier's webpage . It is blank !!!
...

Service manual needed, willing to exchange
gabe.copier@gmail.com

Can you share it to me gabe.copier@gmail.com

Most of the time your comments/ response hit the nail by the head then no complains about it but appreciated

Hello blackcat4866
Thank you for your response:
If you means 9030, Yes I did also I do have the SM
I'm going to install a new hard drive and reinstall the Firmware

Could you review your notes...

I have had a service call that the logo screen stay forever.
I took a hard drive from a working machine, when installed it I got service code F106-5
Yesterday. I resetted the tech password,...

Thank you guys for your fast response,
I'm facing customer facilities now, how hard is to do it?
8 Gb flash drive works or needed special size and make?
By chance there is something like step by...

Machine stay in logo screen, replaced Hard drive from other e5560c now I got F106-5
I restored the encryption key but still same code.

Any help is welcome




Regards

Looking for a 50GA-2001 Drum unit (Konica minolta Bizhub 501)
I'm located in Joliet Illinois

copier addict
Thank you for your fast respond.Anything else may cause this issue?
Customer is 70 miles from office (140 miles round trip)


Black, Magenta and Yellow colors are perfect but Cyan isn't printed out.

Machine is clean, no codes, no warnings. It was printing fine
Image units, fuser unit, transfer belt are 50% of its...