Yesterday, I paid $3.05 for regular gas at my neighborhood gas station. TODAY, the same gas station is selling regular for $3.15!!!:eek:
"Yesterday, all my troubles seemed so far away. Now it...
Type: Posts; User: JimBeam
Yesterday, I paid $3.05 for regular gas at my neighborhood gas station. TODAY, the same gas station is selling regular for $3.15!!!:eek:
"Yesterday, all my troubles seemed so far away. Now it...
Reg-$3.19, Mid-$3.29, Prem-$3.39 :eek::mad:
$2.89 regular, $2.99 midgrade, $3.09 premium :p
Reinstall Magenta Printhead message is displayed in spite of replacing the magenta printhead with a new one and cleaning the contacts numerous times. I inspected the paper size sensor assy position...
Scanner error occurs only while attempting to copy from ADF: original jams in ADF, scanner motor makes grinding noise, and "Scanner Error" is displayed. Scanner functions properly when original is on...
I paid $2.76 for 89 octane. Grattitude abounds in me!!!
Thanks Boogotshot! I didn't know what would happen exactly, but I knew that developer on the HVT couldn't be good.
And thank you too, jpcopy. I was already leaning toward leaving the lower seal...
I am a technician by default. An independent dealer's service manager could not find nor keep good techs. Enter me, moving to Detroit with NO job and NO copier repair experience. The service manager...
If ANYONE needs to purchase a house or sell an existing home in Metro Detroit, permit me to be at your beckoning call. I can facilitate any transaction as I am licensed to sell real estate in the...
Thanks ebm and again, scott_lewis. I reset the error code with service mode 25, dipsw 3-1. I saw dipswitch reset in my service manual and immediately commenced to search for a PHYSICAL...
Thank you ever so much, scott_lewis. I'll check it out.
Error code F35-2 (low fusing temperature).:confused:
Both fixing heater lamps and both thermostats have continuity. All three fixing temperature sensors measure open. TH2 had to be cleaned because...
:eek:$$3.49 regular, $$3.59 mid grade, $$3.69 premium:eek: Mercy, mercy me!! Things ain't what they used to be.:cool:
I'm sorry ON THE DOUBLE PRINTING. I'm not familiar with that issue.:(
Thank you ever so much nightshade, ebm, and CBM. You all have been very helpful. Thank you all for your prompt response.:)
The copied image is skewed about 30 degrees. This copier has 391K copies on it. Six months ago at 368K copies, it had the SAME issue. At that time, I replaced the A/D converter board to no avail,...
Thank you ever so much, Jose! I will investigate this fuse today.:D
:oAnd I was complaining about $3.57 for 89 octane! Oh well.:cool:
Thank you ever so much, CanonHPTech. I needed confirmation and affirmation. :confused: I've replaced those gears before and I took them from a swing plate assy purchased from Global Printer Services,...
Very intermittent misfeed at the fuser. The printer exhibits a perpetual, high pitched, low volume grinding noise. It will not misfeed if the rear output bin is open, according to the operator. The...
I've been repairing HP printers and most brands of copiers for four years. I'm in metro Detroit and my daughter lives in Burbank and I could use a change. I'm a DeVry grad with 17 years experience,...
:) Hey, I see you are in Cadillac, MI. I'm in Novi, northwest Detroit.:o
:cool: I assumed some stray developer resulting from the missing seal caused the upper fuser roller to get scratched.:confused:
Thanks dbrownlee. I tried leaving it off last year and the fuser rollers showed signs of wear prematurely! :eek:
:confused: The lower seal on the dv unit is missing, so I don't have a reference to install one of my two remaining new seals. I incorrectly installed the lower seal and it took most of the developer...