there is no toner supply auger, toner just falls from the toner bottle into the dev unit.
there is a waste toner auger in the waste toner assembly and a waste toner auger in the transfer belt on the...
Type: Posts; User: mickeyc123
there is no toner supply auger, toner just falls from the toner bottle into the dev unit.
there is a waste toner auger in the waste toner assembly and a waste toner auger in the transfer belt on the...
remove the toner hopper, remove the toner hopper cover, 3 screws.
blow the marked sensor with a can of air and reassemble, error should clear.
check the transfer belt waste toner pipe. found this error on a couple of machines caused by backed up toner in the transfer belt. its a very flimsy plastic waste toner assembly on the belt and can...
Hello all,
has anyone else found that the dealer login on the service world site has disappeared?
i'm in Europe and can no longer login in.
clicking on the partner login link redirects to kyocera...
Wow, thanks very much for this kyo_oem!
I did not see that bulletin and it describes exactly the issue I'm having.
I'll give it a shot when I'm back in with the customer tomorrow.
Thanks again!
Yes, tab removed from back of the drum.
Issue is random, could do 200 prints without a problem then put out 10 to 15 pages with lines.
Depending on where I measure from the lines are between 40 and 45mm apart.
Hello all,
i have a UTAX 5555i (its the same as a Kyocera 5501i) giving vertical black lines randomly when printing.
it has just over 1.8M on it and has recently had a new maintenance kit...
I've had two of these machines with waste toner blockages, both had around 400K on them.
On both, the augur in the waste toner assembly had ceased. found compacted waste toner blocking the augur...
hello all,
i have a kyocera 5500i which is jamming with an J4101 error when printing from tray 1 only. tray 2 works fine.
so far, i've replaced the entire conveying unit, new rollers, clean up...
i know its been a while but just to follow up on this,
The equivalent Kyocera model to the UTAX P-C3065, is the M6530cdn.
thanks for the help guys!
got it sorted and noted MM130 in my cheat sheet for future use.
hello,
ive not worked on this older model before.
i have a new dev unit, DV-420.
it came empty of dev, how do i fill it?
is it filled from the toner cart?
cant find a maint mode to fill the dev...
hello all,
i have 3 UTAX P-C3065 (FW dated: 2016.10.03) which are hanging and dropping off the network when trying to scan to email or folder.
Ive read that this was a problem on some kyocera...
im not on site anymore but ill check that when im back in tomorrow.
they do have 3 other 4550ci machines, all printing similar type docs and this is the only one that is jamming in this way.
hello all,
i have a Kyocera Mita ecoMFP 4550ci which is jamming when printing full colour pages.
the pages are sticking to the induction heater and jamming part way out of the fuser, see attached...
the password is,
1934
you'll need the recovery image from samsungs website on a USB stick in order to rebuild the new HDD.
this problem can be caused (depending on the amount of copies/prints) by the grease on the carrage rail (long metal bar the carriage assembly (scanner) moves across) drying out.
when the machine is...