Search:

Number 4 is my favourite. When you power up and hear the snap and crackle along with some small fireworks It says to me" Damm, you F*^K up again!":rolleyes:

I tried to get on to the forum and from last Friday until today I was getting a 503 error. Has anyone else experienced that?

Never happened, Yeah Right. couldn't count the amount I have dropped over 40 years.

If it happens only on plain paper the tray settings are not correct. Try setting the paper weight to a higher weight.

Let us know how you get along.

Yes the film can be changed on its own. Similar to the smaller canon units. Get a hold of the SM and it will guide you through. Good Luck.

Looks like there is dirt on the slit glass. Check the manual on how to clean it.

I also have had the same issue. If they put fresh paper in usually stops this. I found on duplexing the moisture in the paper causes the paper to curl and misses the gate on the second pass to the...

+1 for this. I have also had the customer load the paper seam side down and fan the paper. It helps a lot.

Sorry OC, I am not a Samsung tech. Haven't the foggiest.

Please disregard as my post was not relevant.

The colour copy looks like the registration is way off, can you perform a colour registration?

I believe we all have had those days. :D

If you had read the first post he stated that the printer was taken, snatched, at a show. So if he was able to remove the power cord would you not just take, Snatch, it back?

Yes I have had this issue, follow what the service manual states and you wont have any issues

You need to replace the drum with the power off as per the manual.


After replacing the drum unit,...

Care to share what you did wrong?

Simulation 22-25 Press execute and it will print out coverage report.

Also:

Model Name: BP-FT201
Product Type: Original Toner Cartridge
Toner Colour: Black
Yield: 10 000 Pages

Are the toners original Sharp?

Combination of the toner chip count and the developer level sensor

Don't they have an expiries date? The chips could also be time stamped. If they are just pass their shelf life it would be probably OK. But any further is taking some kind of risk.

Hmmmmm. No where in this post do they mention the toner supply. You may be on to something..

Looks like the developer is spoiled or old. Try another know good developer unit. What happens when you force feed the K developer?

Check your PM X2

Thank You Very Much. :D

Hi All,

I need to find a part number for the Cassette Heaters for a TA 6054ci in Ireland, Can someone please assist as I do not have access to a parts manual. Also is it the same U327 setting?
...