J080 is normally a usually a trail edge jam at the paper exit sensor. It could be a defective sensor or something causing the paper to hesitate entering the first downstream device.
Type: Posts; User: slimslob
J080 is normally a usually a trail edge jam at the paper exit sensor. It could be a defective sensor or something causing the paper to hesitate entering the first downstream device.
Check to see if Toner Save is enabled. Can't remember if it is in User Tools - Printer Features or a driver setting.
What type of USB port USB-a or USB-c?
USB-a:
USB 1.0/Low-Speed: 1.5 Megabits per second (Mbps)
USB 1.1/Full-Speed: 12 Mbps
USB 2.0/Hi-Speed: 480 Mbps
USB 3.0/SuperSpeed: 5 Gbps
USB...
https://scontent-lax3-2.xx.fbcdn.net/v/t39.30808-6/432580122_1083794112869245_6436136235709713686_n.jpg?stp=dst-jpg_p552x414&_nc_cat=100&ccb=1-7&_nc_sid=5f2048&_nc_ohc=IAkxS3eBDMgAX8BH6ig&_nc_ht=scont...
Q; "Why is 239 the most Beans you should put in Irish Soup"??
A; "Because if ye add One more eet'l be Too Farty"!
https://scontent-lax3-2.xx.fbcdn.net/v/t39.30808-6/431416030_262308110259063_6745780258424004989_n.jpg?stp=dst-jpg_p526x296&_nc_cat=101&ccb=1-7&_nc_sid=5f2048&_nc_ohc=IToNgrGEZL8AX_D6xaM&_nc_ht=sconte...
https://scontent-lax3-1.xx.fbcdn.net/v/t39.30808-6/432473513_7548263168567890_6131402040095251465_n.jpg?stp=dst-jpg_p526x296&_nc_cat=105&ccb=1-7&_nc_sid=5f2048&_nc_ohc=S-qAL_1AZ0UAX_CMwLW&_nc_ht=scont...
Take along an ITB cleaning unit as well. I had a bushing seize to a shaft on one and cause a grinding noise and increase load on the motor.
https://scontent-lax3-1.xx.fbcdn.net/v/t39.30808-6/432612267_10226196619568381_1011361955806298092_n.jpg?stp=dst-jpg_p526x296&_nc_cat=1&ccb=1-7&_nc_sid=5f2048&_nc_ohc=u4TbxkLKE0MAX-GnYjp&_nc_ht=sconte...
Considering that Ricoh currently only provides Network TWAIN and Network WIA drivers. they may not support USB scanning.
Do you know what the IPO address is?
If you know the IP address, can you ping it from your computer?
Is the network jack enabled? Check SP 5985-001, it needs to be set to 1.
Hard wire internet or LAN, Local Area Network?
Actually the Smart Operation Panel has both plus NFC. They are all very short range and are used to connect to the android OS of the panel and not to the engine.
By portrait do you mean LEF, Long Edge Feed, or SEF, Short Edge Feed?
Banner printing is only available for the GW controller not the Fiery. If you want to do banner printing, you will need to disconnect the fiery and enable the GW controller and connect to the connect...
No have but based on what SC530 on on other models it is a fan, The -19 most likely identifies which fan. Look for a fan other than those listed for SC530,
DVIDS - News - Team O'Brien: Husband and Wife Assume Squadron Command on the Same Day
I usually used either degreaser spray or contact cleaner. For lubrication a very small amount of silicon oil or light machine oil such as Singer sewing machine oil. Too little oil and the rollers may...
Wrong again boy child. That was Obama. He then failed to follow through.
"The President Blinked": Why Obama Changed Course on the "Red Line" in Syria | FRONTLINE
They will disappear once the problem causing them is repaired.
NO, he means the physical slide plate of the ID sensor assembly mount bracket. Removing it might help.
As for SP 2111, If you use a you don't need b as a run b twice. If you use d you don't need...
There could be a problem with the ITB latch cam. It is located on the back end of the shaft the "swing arm" is mounted. This will allow the end of the ITB closest to the ID sensor to move slightly...
MP 7502 might require a 2GB SD card. And some of those might not work. Best to use either a 1 GB or 512 MB card. If you don't have and cannot find one to purchase, you can use a utility such as...
Glad to have you join us.
The problem can be one of four items; the USB cable, the operation panel, the Controller or the BiCU. The attached Ricoh-UK Technical Bulletin from 4 years ago has a trouble shooting guide that...