Search:

Looking for a copier tech in southern Missouri/ North Arkansas. We service Sharp and Lexmark. If interested contact joshp@schweg.com

Thermistors were bad.

The fuser was the issue. I want to thank you guys (All of you except for one) for the replies. Very much appreciated.

Thanks for the reply. I will clean the sensors and think Im just gonna do a full pm.. I do not believe this model copier has the calibration jig. Correct me if I'm wrong tho. Thanks again.

Josh

Thank you for a quality answer. I really appreciate it.

Josh

This!

I need to do a lot of things thanks

Really? If you have no respone other than this why comment? MX4070N was the last machine I was trained on. Hope that helps

Copier is clean, Firmware is up to date. The page count and percentages are low. Not calling for maintenance and they use sharp toner

Hey guy's I got a Sharp MX-5111N that if you want to make anymore then just one copy the copier says "Please wait automatically adjusting copy quality" after every copy. Takes a half hour to run 30...

F1-87 codes are common on this finisher. Guide springs break.

Check to see if the firmware is the latest version and if it isnt update it. Thats what Sharp will ask right off the bat

Replace the turnover/transport unit and your problem is solved. Usually the exit lever breaks. You can swap out the lever but you have to remove the unit to do it.

It's normal on that copier. The scanner is re-homes it's self.

AR-M355u is not a network copier. You can make it one. The ARM 355 "N" is the network copier..

We charge .0119 b/w 0.069 color. Customer is only responsible for paper and staples.We provide everything else. What good is a "Maintenance contract" if the customer has to pay for maintenance items?

I bet twenty bucks your resist roller clutch is broken