I've had to deal with this issue multiple times. For me, the issue didn't start until about a year in to the pandemic. The feed units on these machines haven't changed since the 2 series, but what...
Type: Posts; User: progoffice
I've had to deal with this issue multiple times. For me, the issue didn't start until about a year in to the pandemic. The feed units on these machines haven't changed since the 2 series, but what...
Make the following software switch setting.
Switch: 10
Hex: 02
That's good to know. We don't sell Sharp, but this method may become the norm and hopefully can be implemented on other devices via firmware.
So the question is, will the manufacturers start implementing OAuth into their devices to comply with these new security standards.
Scanners & other devicesFor scanners or other devices using SMTP...
We just had a call come in for the exact same reason. The gmail account was created February 15th the day the copier was installed. It was also a Kyocera, but I doubt that makes any difference. It's...
These looks like the steps you are referencing.
Can Security Defaults be set to on at the tenant level and still allow settings to be changed for a single user or mailbox? If so, is this a...
Has anybody had any luck setting up and using an app specific password in O365 to get scan to email working? I'm seeing this issue more and more with businesses who have recently started using O365...
For those of you that use the Setup Tool, the latest version will prompt for a password when pointing to the folder you want to convert. There is no password - Just press enter and proceed as usual....
I've had OEM toners do weird things though too. Sometimes an OEM toner will not be recognized as genuine and I've even had a full bottle falsely read 5% until it was depleted. I believe the small...
I ran diagnostics and my R/W Check for On Board Memory came back as NG. This would point to the MFP board as the issue and probably why the firmware is failing to update.
Any update on this C458 firmware update issue? I'm having the exact same problem and have tried everything but the SSD format.
Sounds like another Biden Administration failure.
Check the plastic cover that fits over the front right side lift handle. On this plastic piece there are two tabs that the main door latch connects to. I've seen where the lower tab gets broken off...
I had to deal with this awhile back. My workaround was to create a local user on the PC and have the scans go to a shared folder on the local user's desktop. The Azure AD user could then simply...
Samanator - I sent you a PM regarding your issue.
We have this issue too. Usually what happens for us is the customer installs the new toner bottle where the waste toner is supposed to go. Like others have said, training is only good for as long as...
Usually when authentication is not needed and simply using port 25, the IP address of the copier will need to be "whitelisted" in the mail server so that it can send without authentication. I would...
I recommend a used Konica Minolta C368. You can usually get them with less than 100K impressions and I've seen this model go over 1 million impressions with minimal maintenance. The color is good as...
We service hundreds of these printers. My advice is to always have fusers in stock because they only last about 40K prints. If the drum unit feels heavy when you're there to replace the fuser, go...
We've had a few of these too. Not sure if it's the same noise your describing, but for us the plastic housing was cracked around the gear that drives the transfer belt causing gear skip. I don't...
Is this issue only happening with the M3655idn/A (no fax) model? I might be ordering a bunch of these soon and not sure if I really want to order a bunch of problems. Other than the doc feed hinges...
Kyocera devices have a "Send and Print" option. I just tested it here in the office.
It scanned to the folder I selected and then printed the document that was scanned. Not sure if Ricoh's have a...
WSD stands for "Will Soon Disconnect"
If you disconnect the LCT you added from the machine does that make a difference on trays 1 and 2?
I'm pretty sure the C258 uses the PC-410 and not the PC-415. If you're accidentally using the...
Sounds like you've had a bad experience with a therapist in the past?
Please share your original comments on current events too. Copy and paste is not a comment.