I've found it in another thread:
C552 with FS-526 shows C-1144
thank you all!!!
Type: Posts; User: Abrantes
I've found it in another thread:
C552 with FS-526 shows C-1144
thank you all!!!
Thank you.
I had this no recognising SRA3 problem and found this tread before oppening my manual.
my mistake was trying to make the setup using an A4 (297 width) and "the mistake" A5 (1/2 A4) for...
Thanks. I have saved several minutes now.
:D
Hi there.
If you still have the old developer unit i'd suggest that you mesure or try to adjust the trimbar - the metal that adjusts the amount of developer that goes on the magnetic roll- just...
wow
ok someone had to start it ;)
I'm working with technology since 1986. first telephony then computers and netware (remember cp500, amiga, hotbit?) and "more recently" document production...
Hi,
since you don't seem to be a canon's field technician my first advice is to call a good assistance at your area.
if not possible or too expensive i'd advice you that solving feeding...
at the front of dev unit, above the magnetic roll you have a seal (2 screws secure it), change it.
hello and welcome,
a problem in color copy is easyer to solve when we can see the problem, try to send a full collor HD picture that shows what is happening. meanwhile you can clean the laser...
the line is a problem at transfer belt cleaning blade (you need to clean it up or change the blade), the other problem is cased by oil or moisture at trasfer belt surface, have you touched it? clean...
make some blank copy at 11x17" paper, put it back and make PG 5 haltone pattern print at the same paper sheet, if it shows better or solve the problem your paper has high moisture: buy a new paper.
...
If U mean that pure black copies shows brown it shure is a problem. Can you take samples and post the same image on CYMK and pure black?
I don't think it's easy to bk unit get any contamination by...
the dots that appear most cleary at the closer (2nd) image are regular, the dots are caused by drum problem. if you take out the drum unit you shall see the dots at drum surface (mostly caused by old...
If possible post another images with a test pattern or pictures and more definition
it's necessary to see how the residual image appear, if it's only at magenta and the size (interval)
can u...
have you seen if that's a fuser problem? (stop page before enter fuser than verify the unfused image, if there's no ghost it's a similar toner problem or fuser dirt / bad)
if its only at magenta...