Also via the touch panel in Application Site
Type: Posts; User: GIUBOSS
Also via the touch panel in Application Site
Hi guys, as mentioned the printer does not respond to any command immediately after normal startup, I can reset or enter any command with the touch but after a few seconds the display freezes and...
Hi guys, I would like to adapt, if possible, the working fusion unit of the 4052ci to the one of the faulty 2552ci. Any tips? Thanks
carry out a thorough and delicate cleaning of the mirror and glass section, use a mirror cleaning product, taking care not to leave traces of halo.
In Italy it's fine, no changes
Have you tried inserting the blue stick into the holes under the pcdu M several times??
What game would that be??
If I remember correctly, only if you set the user codes as an administrator.
Check the ground contacts of the ITB cleaning unit. Increase the pressure on them.
Welcome and have fun
don't blame me, why even check the scans?
ah... once everything is clean, you have to do the color calibration in the user menu (copy-print)
Try cleaning the optics, then remove the pcdu assemblies and clean the 4 slides above the laser. Check the yellow charge roller for dirt or anything in that assembly
Since the machine is not the latest model on the market, why not start with the simplest thing, that is, replace the 3 paper pick-up rollers?
You could also just use toner powder from similar models like the MPC2000 and you can find them online for less than compatibles.
Original cartridges? Can you log into WIM? If you log in, try updating the FW
I read this around....
I would blame it on the duplex registration assembly CC493-67917.
My theory is that the duplex re-pickup clutch ( CL1) is slipping when it should stop (pause) the 1st sheet...
Have you already seen it here?
https://support.hp.com/hk-en/drivers/samsung-proxpress-sl-m4080-laser-multifunction-printer-series/model/16462950
But is it a scanned color page? Is the dark background black? If you are using compatible toners you will often have these problems, and using the originals now won't improve much until you suck out...
The default scans should be found in the path C:Users\Pictures\ControlcenterX\scan , but in the "configuration" you can change the destination of the folder in Brother utilities or in Control Center
welcome and have fun!
Are you using non-original toner? Probably yes and perhaps almost running out. If you see the toner roller with missing parts, try inserting a sheet of fine emery paper between the roller and the...
I think you will have already cleaned the entire optical section, update the firmware. Have you seen the other SC codes in history?
Check the flag sensor located in the center of the register roller. One more thing, have you seen the paper stuck if printed correctly?
Yep, I checked...