Hi ALL,
I just replaced the HDD on a MX-3140 and getting a U2-60 code. If anyone still has water mark software and I could get it I would appreciate it.
Type: Posts; User: KMtech69
Hi ALL,
I just replaced the HDD on a MX-3140 and getting a U2-60 code. If anyone still has water mark software and I could get it I would appreciate it.
customer wants me out to fix next week after tax dead line. I will let y'all now what I find.
Their is no error code. All scans just sit in memory. In the jobs list it says waiting. I also can't access the copiers web page.
Hi All,
I'm working on a bizhub 454e the won't scan to FTP. The docs will scan through the doc feeder, but won't transfer data to server and sits in the memory. I have reset the network and...
No I don't have another machine. Maybe I will try to remove it and see if it will start to work or give me a different code.
Yes it does have a staple/ stacker. I have blown all the sensors out in the stacker. Yes I have looked at the manual and I can't find the Code anywhere. It is also saying " ! Please wait checking...
I'm working on an HP Lj700 that has a code 13.85.FF paper jam. I have checked all sensors in the upper right door assemble, and the document feeder. thank you in advanced.
I am needing a 454e movie. How should the usb drive be formatted and the movie placed in the usb directory?
Hi All,
I am working on a Workcentre 4250 that has a issue with trays 3 and 4. The message on the display says "some trays are unavailable". This unit is at a University and they have changed the...
Hi All
I'm working on a Workcentre 7545 that I replaced the black developer and the first 3 prints looked great. Then I ran a printer calibration and the blacks went back to the same way they...
Hi all
I have a Bizhub C35 that I updated the firmware. It seemed to install fine but after it restarted the code came up. I have tried to download the firmware again and install it and keep...
I have a customer that has a Bizhub 421 that gives a c-6101 code after the last page goes. I have checked and replaced all sensors in the adf. I also replaced the main board with no change.
Hi All,
I'm working on a sharp MX-B401 that has a code E7-11 that is intermittent. I have reseated all connectors on the scanner board and scanner unit. I also cleaned the optics, glass and the...
Hi All,
I have a customer that has a LJ E 500 that is all of a sudden prompting for a user name and Password to scan to network folder. I have entered the computers name and computer has no...
I Have installed all the modes and updates except for the firmware. I have also held the drawer into position and had the problem happen.
Yes I have replaced the whole feed unit. It will run 2 or 3 copies then say replace paper.
Hi all
I'm having a problem with a BH350 that is asking for firmware "load paper in drawer". If anyone still has this firmware I would appreciate it.
Thank you in advanced
I'm working on a MX5001 that copies and prints monochrome just fine but when you copy or print color the machine jams at the registration roller. I did just replace the drums and cleaning blades on...
Yes I do. How much would you need for it?
Hi All,
I'm looking for a FN105 (minolta DI550 finisher) main board. If anyone could help it would be appreciated.
Thanks In Advanced.
Hi All,
I'm working on a Workcentre 7120 that needs scan to FTP setup and I keep getting a result of Completed with error (018-592) : Lock folder create fail . If anyone could let me know is there a...
I have a C552 that is creating a image down the page that doesn't belong there.
Here is an example. This happens on print and copy, but does fine when scanning.
34252
Thank you in Advanced
Here is the code I'm getting MCU firmware error, error 024-340, Error code 070000000
33336
Hi All
I'm working on a workcentre 6505 that the transfer belt wouldn't reset and found the CMU board was bad. I have replaced it now I have a firmware code that it looks like I need the boot_*.prn...
Went back out to customer and installed the following boards MFPC, CF, Lan , Hard drive. When I did this I got the same results it stays at the logo page. If I pull the fax card and pulls a code then...