it happened when paperjam, slide out the booklet drawer then 012-264.
I removed the PL17.131 sensor, then 012-243.
How to enter to CC mode for testing the knife home sensor.
I bought the manual...
Type: Posts; User: garuda
it happened when paperjam, slide out the booklet drawer then 012-264.
I removed the PL17.131 sensor, then 012-243.
How to enter to CC mode for testing the knife home sensor.
I bought the manual...
Hi folk,
I bought of him.
He got the laptop version too,
and he is a good guy, service very fast and understand the field.
Cheers,
Hi Guys,
I am taking out the versant 80 press set this weekend, and need the part and service manual book in regard to preparation dismantling and resetup.
I am willing to pay or donate by paypal....
Hello everyone, have you guys ever buy service manual from "service-manual.net" ?
I am going to buy pitneybowes di950 which is very cheap and only them have it, but their "contact us" page seem...
Hi Homerlasvegas,
did you endup buying the Ricoh C5200S ?
How much it cost you?
I got similar offer with nearly 1 mil clicked.
Cheers,
Hi Guys,
Any luck or symptom for E21 clear insertion area ?
Mine happen just now, di380 can fold smoothly, but insert to envelope always stucked in the middle insertion area where the fingers stop...
In the middle of refurbishing the PF-601 Two trays Paper feeder that come bundle with C6500.
I really need the Parts list manual for that.
Appreciated very much someone can help.
Thanks in...
Thanks everyone, you are a legend.
All good now. its my mistake should be ADF 2>2
and reinstall the driver as windows update make the changes maybe.
Warm regard from Sydney.
Thanks mate for prompt reply,
Before the swing exit plastic was broken and threw error code C-3102. I changed that already and now NO code.
It print straight to the finisher in 4 sheets, first and...
Hi Guys,
I have C6500, now got a problem on printing duplex.
Instead print double sides, it print 4 sheets with sheet 1 printing, sheet 2 blank pages, sheet 3 printing, and sheets 4 blank pages.
I...
Hi folks,
Bizhub C6501 with Creo IC-304Plus won't boot, always saying no operating system.
We don't have any Creo CDs, but have another Oce CS650 which is Konica with Fiery box.
Can we use the...
Hi mate,
I can remove the PK 512 from FS 607, but it looks like we need the plate to bridge the input paper from the printer to the first roller.
do you know what is the part number of such plate ?...
Looks like Drums.
Hi mate,<br>I did on 47 mode, switch 01 bit 1 = yellow<br>bit 4 = magenta<br>bit 7 = cyan<br>bit 10 = black<br><br>before I did check on switch 58, <br>bit 0 = 221<br>bit 1 = 127<br>bit 2 =...
Many thanks Laitang for the info, and did the 47 41 multimode12 - 17 all result are good like this:
47 41 multimode 12 to 17 IN: 001 OUT: FIN
Also did PRCB 47 49-00 IN: 000 OUT: FIN
any way...
happened on start up.
Have done :
clean the augering section on transfer belt cleaning blade
change the whole transfer belt from other unit
Clean the imaging sensor inside the shutters.
Tigthen...
Hi mate,
does anyone have the procedure step on how to replace the exit paper roller. it is on the left of the machine where paper goes to finisher.
I bought the manual in pdf , but there is no...