Search:

Type: Posts; User: Blizzoo

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Re: Toshiba 385s invalid factory configuration problem

    Have you tried a simple Factory Reset?

    If you think the toner cartridge is ok, to me it sounds that your machine might have come from a different Region or something? Maybe a setting on one of the...
  2. Replies
    4
    Views
    299

    Re: OKI MC760 shows F106 Error

    Yes, MQ01AB U032W it was a Wipe Technology type HDD

    MQ01ABU-W Series | Toshiba Electronic Devices & Storage Corporation | Americas – United States
  3. Replies
    4
    Views
    299

    Re: OKI MC760 shows F106 Error

    Short answer, if the previous HDD was ADI-HDD then you must use a new ADI-HDD Wipe Technology type, normal HDD's won't be accepted if ADI-HDD was previously in use.
  4. Replies
    11
    Views
    578

    Re: 504 Gateway time out

    I confirm it's very slow navigating, I thought my internet is going crazy again but other sites load normally.
  5. Thread: Hi to all

    by Blizzoo
    Replies
    4
    Views
    400

    Re: Hi to all

    Welcome to the Forum!
  6. Thread: 8518 wrinkles

    by Blizzoo
    Replies
    7
    Views
    2,296

    Re: 8518 wrinkles

    Yep, was about to mention this possibility. Easy to break those while you pull out the fuser. They snap really easy under prolonged heat treatment.
  7. Replies
    6
    Views
    1,551

    Re: Toshiba estudio 477SL printing quality issue

    The toner dumping must be because of the Drum Unit leaking through the developing roller-leveling blade.
  8. Replies
    6
    Views
    1,551

    Re: Toshiba estudio 477SL printing quality issue

    You need a new Drum Unit. The 'green toner roller' you tried to clean is scratched hence the repetitive marks on the left side of the print page. The LED print head is located under the Top Cover.
  9. Thread: Block Ads

    by Blizzoo
    Replies
    4
    Views
    2,001

    Re: Block Ads

    I use adblock and browser like Slim suggested, makes me happy especially watching yt videos, no more annoying and time consuming adds
  10. Re: Win 11 Print Driver icons taking up to 15 minute to appear.

    Thanks, will try with the next occasion.

    I remember this was a problem like 1-2 years ago but don't have the fix anymore, was similar with what you posted related to the manufacturer icons nod...
  11. Re: Things to note when removing the CMOS battery on the ES3005AC?

    Usually in that area where the Fan is will be a nice accumulation of dust over time. And dust can help retain moisture affecting electrical contacts. No point replacing M developer, Drum as it's not...
  12. Re: Toshiba 2555 CSE - Toner shows that it is empty although it's not

    By the looks of the pictures you need some nice maintenance to get this machine's printing quality.

    You need a service vacuum - most important tool. Take out all of your drum units, developer...
  13. [Annoying] Re: Windows not wanting you to get to the old Devices and Printers

    Win Key + R, in the Run command type: control printers
  14. Re: Does WSD have a negative influence on scanning?

    Unless it's not already in use for some integrated scanning features through software pulls scan or apps on phones to scan, it should be fine to disable
  15. Re: ECOSYS M6235cidn - Prevent selected network users from printing on my printer

    First change the IP address of your printer, set it static IP. Disable any WSD discovery/functions, bonjour as well - used for AirPrint MAC's/iPhones, Mopria etc. You want your printer not...
  16. Replies
    10
    Views
    1,963

    Re: Toshiba E Studio 3055C with error CA00

    If the Waste Full message was the culprit of all of this unfortunate situation :)), usually will mess the transfer belt cleaner unit packing toner inside and pushing out the snail spring slowing down...
  17. Re: Toshiba e-studio 5015ac wireless printing enabler

    Does the machines have the 2nd LAN adapter installed?
  18. Re: E-Studio 3505 ADF Scans Have Lines on Right Side

    Most probably your RADF needs skew and high adjustments as per manual, call an engineer
  19. Thread: Let's Rumble

    by Blizzoo
    Replies
    1,574
    Views
    303,753

    [Links] Re: Let's Rumble

    JUST IN: VP Kamala Harris Touts Climate Change Response Investments In Baltimore, Maryland - YouTube

    9:35 in the video, followed with applause
  20. Replies
    32
    Views
    5,615

    [Electrical] Re: e Studio 2500ac wanted firmware

    You need to unzip the Firmware file on your USB root, basically your firmware folder file on your USB should look like 2505AC_5005AC and inside this folder you must have all the necessary firmware...
  21. Re: Ricoh SP C262SF Lines on copies only when using ADF: the slit glass is clean

    Easy to test if traditional scanner or the one with a second scanner (usually mounted on the ADF side underneath):

    - make a double sided copy of a single sheet with something on both pages,...
  22. Thread: SMB Scan

    by Blizzoo
    Replies
    7
    Views
    1,092

    Re: SMB Scan

    Maybe a static IP instead of hostname for the smb path may help finding the PC's after sleep mode? just throwing an idea
  23. Replies
    6
    Views
    601

    Re: 7516AC Fax Dial pad not accessible

    Check in Top Access under administration, I think it was in Maintenance tab and then Panel View: here you can disable/hide features for copy scan etc. Maybe for the Fax the Direct Input is disabled...
  24. Replies
    5
    Views
    2,343

    Re: Lexmark MX721 611.xx printhead error,

    Will the power supply be a thing to test taking in consideration the load may vary by setting it to thick? I know from the past experience any printhead errors I had with Lexmark (those printheads...
  25. Replies
    3
    Views
    385

    Re: Remote printing to a copier

    Have a look at PaperCut Hive. Suites SMB, don't really need a print server and Toshiba fully supported for embedded app, you can print from anywhere.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4