Found one!
4050i-1 hosted at ImgBB — ImgBB
4050i-2 hosted at ImgBB — ImgBB
Type: Posts; User: copyrooks
Found one!
4050i-1 hosted at ImgBB — ImgBB
4050i-2 hosted at ImgBB — ImgBB
I was looking through the parts manual and its not there. When i get to my office on monday let me see if i can find one we haven't taken off yet.
I took the class a while back on it and does have potential. I haven't had a real reason to utilize it for the amount of machines to make it worth it yet.
The firmware was an issue even during...
The driver software file for c360i should have the c450i driver also. You might want to use the setup 64 file so it can find and pick the right one. If you have to install through windows print and...
Make sure you have the correct driver for the model you are working on, in my experience it will never go through unless that is correct.
this model is a different animal from the other Konica models. There's a checkbox about Certificate verification. Uncheck it to see if it goes through.
We have had a few of these codes pop up and we have just been replacing the cpu board fan (fm3) and it seems to resolve the issue. This goes for all the iseries a4 copiers/printers. The problem is...
check the imaging units, one of them might have a p code or if you wait long enough might finally throw a c2551/2/3/4 code.
YES! so annoying we've had over 10 i series copiers do this.
format the drive with the hpusbdisk tool
Looks like they call it image data for these small guys
Try removing this rubber spacer between the feed roller on the tray itself. Had a few do the same and we threw that part away no more issues.
If you switch the caps you sure can. Of course it wont reset to 100 but if you're in a pinch.
Hi,
Can anyone be so kind and help me out with the service manual for a Sharp MX-C301w. Normally a Konica Tech but we got thrown into looking at these for a potential customer. Please and Thank...
There's a konica knowledge base article regarding the fs 533 and pk 519 with that exact jam code. Turn on engine dipsw 15 restart copier and test. Had to so this to three copiers with this ongoing...
I series is terrible. Transfer belts getting clogged. Drums and fusers not lasting. Doc feeders having to be modified. Storage boards failing. Constant firmware updates. Even feed rollers not...
This C3351 is not the same as a C3350. If i'm not mistaken the c3350 and c3351 have different menu options. The bizhub c3350/c3850 menus work just like the bizhub 4050/4750 menus. The bizhub C3351...
The techs should get the reimbursement directly from konica. Waste of time
perform trouble reset procedure to get into service mode and perform fax file format. If still no dice perform trouble reset procedure to get into service mode and initialize fax settings in service...
My vote goes to the bizhub 420. Close second bizhub 600 so much dumpage
I had a similar issue. I had a customer who used Pagescope Box Operator and wanted to still use when upgraded. They went from a E series to I series. I had to transfer all files from user box. I...
Before i saw the bulletin i thought konica was gonna pay us to cut springs on each machine :o
you can just take out the spring and cut some coils off of it. Not too hard to weasel it out and cut some coils off with some pliers to your liking. Time will tell if you didn't cut enough out. ...
At our office we got told we should feel lucky for still staying open during the pandemic. No raise or more mileage reimbursement. While our bosses got 2 decent size PPP loans and are buying new...
I would say have a look at the tray cassettes make sure no morped or broken pieces. If no dice then i would say take out the main drive assy. Maybe a broken gear on the assy . Good luck