Hello,
Is anybody able to share with me a Lexmark XS795DTE service and parts manual please? It's the only one we have out and are struggling a bit with it..
Many thanks.
Type: Posts; User: JSC
Hello,
Is anybody able to share with me a Lexmark XS795DTE service and parts manual please? It's the only one we have out and are struggling a bit with it..
Many thanks.
Evening,
We are Kyocera & Konica Minolta dealers and have won an account where we need to wipe the memory and hhd on 3 old(ish) Canons. The models concerned are:
5240i
5235
5030
We know...
there have been a few bulletins on this, I think it can also come up with waste full when it isn't. The actuator has been redisigned, you have to remove the whole waste bel assy.
i'll have a look...
is'nt that the truth.....
Sovled..
Fitted main board - now working fine.......
Yes tested all ok, but changed memory and HDD as well
Yea i've had the same before did all the above no change, but I don't think this is a driver or network fault as it locks up printing...
yes and I tried it print as image off! And print as image - no change
no joy.....
Tried that already, interestingly the machine works for a lot longer period but still crashes after a...
Have used about 4 diffrent readers all the same problem. also printing test PDFs that I have used lots of times with no issues.
Changed the settings to match yours, worked for 3 pdf's then crashed out :(
Have tried all the correct Konica Minolta drivers eg, PCL, PS, Clasic, Universal. it also crashes if sent as 'Print as Image'. used Adobe reader, Foxit, Nitro all with the same result. Works for a...
Does the same.
Hi.
Have a strange one with a C454e that will print a few PDF's then just lockup/frezzes and the device has to be rebooted. Doesn't seem to mater which type of PDF reader is used or how the PDF...
Yea have been fighting this fault on a couple of machines as well 1 306ci and 1 356ci. The beta firmware does not fix the fault, i have had notification from Kyocera Germany there is a modified drum...
If you look under details in the job log what error is it giving you? That should give you a clue on why it's failing.
Thats what we heard as well.
Went to a Ta6052ci with poor quality, checked the black toner and noticed it was was in fact that tell tail brown colour, customer said they ran out of toner so just...
Just had our 1st (and I doubt the last) full waste toner inserted into the machine as a new black toner.............and it goes in easily!!!!
We have also had to change a couple of Magents dev units for noise now....
so far we have had lots with fsr squeaks and a couple of machines with squeaks from the exit units.
Getting lots of calls for "squeeking" on these boxes, plus have had a couple of dev units fail.
Came across a strange one last week on he Ta4052ci. Set up pin protected user boxes, if you send a job with the incorrect pin the machine flashes a warning as you would expect, but after about 10sec...
Anyone seen much of the new range machines. Got guys booked on the course, but not seen any yet.
I work for a 5star Konica Minolta dealer and we only get a 9 month warranty here in the UK..
Can you scan and upload an image of the issues you are getting? We might be able to point you in...
what a dick I am, I can't believe I forgot to post my fix..... As it turned out I was unlucky enough to have fitted a faulty new fsr drive moter, fitted a 2nd new fsr moter and the fault has never...
J99-01 is a paper size error/media miss mach error (even when it isn't) if you change the soft swich (I think it is the default now on the latest function firmware) the machine will ignore the miss...
Lots of bulletins on the Konica Minolta site relating to that particular jam code.
Change soft switch 145 to hex 02 try that first.