There is no issue.
The machine Takes the new tb-hdd. It will be make a lot of partitions. I Never have reached the Borders of the partitions.
The file-System is also Limited by files.
The...
Type: Posts; User: Michmich123
There is no issue.
The machine Takes the new tb-hdd. It will be make a lot of partitions. I Never have reached the Borders of the partitions.
The file-System is also Limited by files.
The...
Polygonmirror Will Not make this issue.
If polgon is Dirty the bw Print have Many many strips in lsu-Scan Direktion. The Sync-Signal can Not be Detect . In Color all is Fine.
I think there is a...
One of my machines had The same issue .
i checked all The Things .
at last i found two things .
on mfp was fired The Fuse for display power. A little Smd-typ . I think 2A of 1,6 . In near of the...
hey there ,
the tray 3 is a multi-purpose tray,
there is the sim 40-12 to calibrate the detection sensors .
execute the sim and perform what screened in display . (set to max, set to a4, set...
Hey there ,
go into sim 50-20 and look , if it on of the first entries are set to 1 , you have a problem with toner in the DV-boxes .
level of toner is to low . solve these problem .
if you...
Check the gate magnet . if it is not corect installed , the gate can be hanging .
hey there
these message is , you have switched a little switch on the controller . the name of the switch is "update on/off"
switch it to off . then reboot the machine .
if it is the same...
hello ,
you can buy at different webshops these option .
Only you need is the applicationnumber on the sheet , what is in the box .
then you may collect the exact modellname , the...
hello ,
the pux1 is for XPS print . you need the mx-pk11 for printing postscript under mac .
the pk11 is a softwareoption .
your local sharp dealer can help you .
if the pk11 is for a machine registered , there is no way to transfer to another .
The LSU-Shutter is a complete frame . the wastetonercontainer will move them away from the glasses , if it is insert in .
take the LSU out of the machine an clean the polygonmirrors . By the way you...
I checked this out , i have ordered the fuse and Transistor (as a referencetype) .
the diode dont have a Type printed on her Surface . Also i solder it out and Test it by normal way . They dont have...
Hey there ,
this is a Problem with the Firmware.
There is an lc12 Or Enginefirmware in the Download-section .
contact an local Dealer Or supporter .
I think There is a Problem with the autosensing for networkspeed .
Try to fix the networkspeed with Sim 55-03 sw 6 .
bit 1 from 0 to 1 autosensing Off
bit 2 : 0= 100 , 1= 10
bit 3 : 0 =...
Hey spanky ,
i mean the Problem by Registration 50-28 . There is Printing only the Same pattern . For all Trays . The pattern for tray 1 is Printed by tray 2 , 3 and 4 When a de-20 is installed .
Or Look in Admin Settings for the productkeys . Even ps is installed the Ps-Expansion kit is marked .
Hey mojorolla,
have You found the reason for the Problems with the Registration? I had the Same and Sharp Said they have no other machine with the Same Problem . I had installed more Then 20...
Hey ,
i found this , Hope it helps .
27369
Please take a Look about the drum.
Loosing Developer comes with an blank polished drum surface.
Change the drum- Unit or replace the mk and drum .
Then the developer.
Michmich
Please Show a Sample
thx
Hey zootech ,
there is no Chance to turn off the copylamp After copy or Print .
The lamp turn off in Auto off Mode.
We have Many machines they have Lines in Scan and copy by a thermic...
Yes there ist an tech Info with modified photosensors for cassette and Doc Feder .
we Tryed this , but theres no success . Also we changed the adf pwb . With Same Problem .
after we Turn the...
Change the Setting of Long size in SIM 26-50 .
Then you can change the size for Bypass Format to max 1200x297 . This size can only use for Print .not for copy !
the bannertray is Nice to have ,...
Thats right. But dont forget the authentification in driver. If You dont have send the Passes by printjob , the colorprint is been canceled . The bw Print Works fine.