Yes it was control pcb.in old models there is issue with this pcb
Type: Posts; User: aakash2411
Yes it was control pcb.in old models there is issue with this pcb
I was also thinking of interchanging hvpcb but it is a tire some job.will do it tomorrow and update.
Yes totally blank.had it been laser then machine would have given code .no image is formed on drum if I stop paper mid way.
Facing issue with Kyocera fs 2040dn.the machine printing and copying blank white pages.has hardly done 40k.
I have cross checked dp unit ,drum unit,main board and power suplly in another machine.all...
Hi
The problem has solved .the issue was main motor gear unit.i was creating trobles.
Thank u all
Facing this issue in ir 3235 .I have replaced drum unit and developer unit but still same issue.
The developer unit was not rotatating at first .I had to remove motor assembly section and fixed...
check thermostat below the fixing heater as the get dirty due to oiling and greasing. also check the pressure roller bush as they get worn out and move with pressure roller reducing the pressure...
Yes that all jas been done by me but still problem persist.
Having a headache with this machine.tried everything but unable to pinpoint problem.
Yes in 2870 it is door harness but I am facing similiar issue while simple printing or copying single side in 3235.
Sometimes it works well for 400 copies then suddenly same issue props up
Hi thanks for reply.main motor keeps on running and on screen it shows printing with a paper stuck near registration flag .after a while it shows jam and in jam code it shows time out error...
I have done all that .the issue is that it doest show paper jam but on screen the machines shows printing and keep on running continuously and after 2 or three minute the jam code is timeout
Facing issue in ir 3235.it jams paper near registration sensor after 2 or 3 copies and keep showing printing on screen and running continuously
Facing issue in ir3235 .machine continuously run after taking 4 or 5 prints and keeps on showing printing on screen and in jam code in service mode shows Timeout error.
Hi
I need fuser wiring diagram if Kyocera 5002i urgently.
Bro it's my machine on rent at customer site.
I need wiring diagram as i they were chewn by mouse .some of wires are not fitting .
Hi
I need Kyocera 5002i fuser unit electrical diagram .
My techie opened unit without taking pics and now it's a mess.