Search:

Yes, registration is in x and y axis, color registration is the lining up of c,m,y,k and

yes many times.

I removed and cleaned the sensor,inspected the drawer and ITB. Preformed INIT. the toners are third party however. There has been no change in the output, I guess the next step will be the sensor.

Here is the Diagnostic page, I tried reseating the ITB also.

I have a great running 451 but the color calibration is off. I ran the calibration about twelve times but it's still off. I set the machine back to defaults, and keep running the calibration. The...

you voltage is too high and you are pulling developer out of the developer unit. check your door settings and you may have to lower the yellow charge voltage . I hope this helps.

Don't forget to hit the star button if you liked my suggestion.

Be sure to check the bushings on the reg. roller they have a way of wallowing out.

You have no choice replace the Laser, no one ever saves the motor when they replace it.

you have to turn it on it,s in service mode level two but I forget where it is (sorry it's been a long time).

I could use a little help, one of my salesman just sold two Brother MFC-L8850 and I don't have any manuals for it. Does anyone have these? Thanks for reading. Tim :cool:

you change the number in the first column, you touch it then change it to a zero or a one. Then if there is an ok button use that. I hope this helps.

I am in a jam and need a Canon Port Kit A1 2290B001AA does anyone have one,new or used. They fit a 5180,5185 series . Thanks for reading.

That person gave you instruction for an advanced not a regular. Its in additional functions under network. you turn that one on. Then the IP address will open up.You can use DHCP to grab a blank...

I have 26 years in thus business and have been a service mgr. a couple of times. What kind of problems will we have if some one gets hurt or worse yet a machine catches fire ,what will happen then . ...

check the sensor right after the lower fuser. It can become unplugged sometimes if yiu are changing the lower . Also chck the spring on the arm itself it can come off.

I thought this site was for professionals we can't just let end users be mucking around in service mode.:cool:

26 years now I work on Canon's

I'm not trained on that particular model but a 220 code is usually an exposer lamp or exp. heater

You can't do it! I know why you want to do it but, you can get into big trouble doing this.

I need to know if anyone has a EP-2080 control panel pt# 1149-0117-02,
I'm in kind of a jam.It can even be used.

Our Katun fuser rollers work just fine.I stay away from there drums on our color units.

You might want to save the magenta unit, K/M is having problems with them right now and there is a retro fit kit for it.

Does anyone know of a company that will repair main P.W.B.'s for this machine?

I have the latest N.A.V.I. service support tool on cd and will send it to you if you still need it.