Did you remember to run "new developer" in service mode?
Type: Posts; User: B0265
Did you remember to run "new developer" in service mode?
We have had this problem on a brand new C250i. It had probably been dropped or tilted during transport because we found piles of toner/dev inside the printer. After we have cleaned the interior and...
We have replaced the CPU board for the same problem.
I have not verified it in macOS Sonoma, but you find the driver settings for ID&Print here, check "Available Operations in [Output Method]"
The documents you have posted refers to completely different models. I doubt that any of those drivers will work in a C220.
I don't think you will find any device drivers for elatec for this old device.
There was loadble driver for YSoft card readers but I'm not sure if they are still available.
@jotunn
I have exactly the same problem as Lync, if you can solve his problem please help me also.
Printer Serial Number (BLANK)
MAC Address: 00:20:6B:FC:FD:56
CE Password Reset Request...
There is a problem with the latest iOS:
4e AirPrint firmware updates? Latest iOS
The information I have says that you need FW version G20-J6 (G00-J6) or later to enable AirPrint.
I think G20-41 is function version 2 so it is interesting that it did work earlier.
We had a similar problem many years ago with Windows 8 (or 8.1?). I was solved in a Windows update.
The we saw this again a couple a years ago after a W10 update. It was also solved after a Windows...
Try this, it has worked in W10:
Device setup in progress - Printix Administrator Manual - 1
Search for "version up firmware" in Knova, I think GBF-M0 have been replaced with a newer version.
I have only used this software SW on the 8 series (running SafeQ) so I'm not sure about the i series.
Try this:
Avoid the one user’s document from being mixed with the other user’s document in outputting if jobs are on hold due to a print error.
Software SW No.213 (bit 3)
0x00: Disable (Default)...
Sorry, my mistake.
KM have a software called driver packaging utility.
It’s working now😀
I have the same problem, did yours get solved?
I can’t empty the inbox, there must be some glitch.
Here is the new request code.
I just noticed that it is the same code even if it was generated 15 minuters ago?
We had this problem 2-3 times with Windows 10 clients but it was a while ago.
In our case it was solved with the "Canon method" (KM printers/drivers).
I don't know how to "enforce CSR with a group...
I don't know the full story but what I know is that the CPU board was replaced to fix a boot-up problem.
Now it shows "enter serial number" so the serial number i wrote is from the label.
The...
Ok, we must have something wrong. Thanks for your help.
We might have misread the code, can you please try this:
M3LMS-KXT26-AMHRB-RFRBV-E6V6L-9G8YD-EMZRG-8YDPT
I have attached a document from KM, but I think it's the more or less the same solution as the one from Canon I posted earlier.