Search:

Type: Posts; User: copier tech

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds; generated 22 minute(s) ago.

  1. Replies
    3
    Views
    177

    Re: 250i Toner, Drum, Dev errors

    Had this once before.

    Take out all the toners & IU's close the front cover then fit back each unit in the order displayed on the screen, this did the trick for us.
  2. Thread: DX 5850

    by copier tech
    Replies
    1
    Views
    96

    Re: DX 5850

    Have you compared the two? They are totally different.
  3. Re: C253 can't get into service mode to format a new hdd (Error Code C-D010)

    We can supply you with the firmware & tool and can be contacted via either website below.
  4. Re: BH-C-284e, offsetting, would love to have an explanation

    The black imaging unit is always being driven & has a charge even if only doing single colour. So if the drum is worn you will get black marks / lines.
  5. Re: Konica C224e - really strange sporadic stripe on one Site

    Those lines are caused by the transfer unit cleaning blade not cleaning the belt fully after the device has run a calibration.

    You say you swapped this unit with another one but I assume with a...
  6. Re: Universal Print Driver vs Mini Universal Print Driver

    Oh yes I remember being prompted for the Win 95 / 98 install disk when installing printers, not much fun!
  7. Replies
    4
    Views
    334

    Re: Brand and Model Field Reviews wanted

    In short I would recommend the Konica Minolta Bizhub '8' series. Simple to maintain & reliable & there should be plenty in the off lease market.
  8. Thread: Firmware

    by copier tech
    Replies
    4
    Views
    271

    Re: Firmware

    Hi,

    We can supply you with the latest Kyocera firmware.

    Feel free to message us via either website below.
  9. Replies
    8
    Views
    432

    Re: i-option (webserver) license code

    Was this unknown Bizhub a new or used machine ? if it's a used one maybe it has had a the storage board or CPUB replaced in the past.

    You may need to update the firmware & the i option file etc...
  10. Re: Move a Ricoh ProC9200 to a new location. Any major precautions needed to be taken

    To be honest if you're having the ask that question i'd get a professional logistics company to move it for you.
  11. Re: Trying to make a very specific configuration for a client. Any advice would be g

    I have a few clients that want something similar. I simply lock down the utility key with SW 200 HEX 20. Then to access the utility key just enter the default admin password 1234567812345678
  12. Replies
    2
    Views
    269

    Re: Mpc 6004ex error

    When the fuser sleeve are near end of life they start to make a crackle type sound or check the machine history some engineers reset the counter to clear the 'replace fuser sleeve' message.

    You...
  13. Re: Ricoh Pro C5100S Toner Cartridge Empty

    Double check you're not left a connector off / loose.
  14. Replies
    2
    Views
    188

    Re: XEROX DRUM C405

    I saw this is your second post. We use info@xeroxparts.eu
  15. Replies
    1
    Views
    160

    [Misc] Re: XEROX DRUM C405

    We have a contact we use, drop them an email info@xeroxparts.eu
  16. Replies
    6
    Views
    658

    Re: More i-series problems

    Wow that really does look like a design flaw!
  17. Re: Ricoh MPC3004 "Load paper in bypass tray" error, won't print

    This will be a driver setting. Check ALL settings are ALL set to your default paper size AND weight.

    Also check they are all using the correct PCL 6 driver for the MP C3004 & not on a WSD port.
  18. Replies
    9
    Views
    673

    Re: Help! How to move C258…?

    You can disconnect the finisher & also the main copier engine will lift off the lower half, paper cabinet etc. These 3 sections can then easily be lifted by two people. The main printer section has...
  19. Replies
    11
    Views
    482

    Re: 3011 Scan to email

    Try updating the firmware.
  20. Replies
    10
    Views
    678

    Re: Canon IR Advanced C5045

    Does the device come to ready if you fit ALL the original boards back to the machine ? If so try updating the system software, this may resolve the original issue.
  21. [CQ] Re: Kyocera TASKalfa 2552ci drum replacement

    A master mechanic at work !

    They sure don't make engines like that anymore, hell they don't make engines anymore!
  22. Replies
    9
    Views
    590

    [Misc] Re: im-c3000 firmware

    We can supply the latest firmware that you can use to update via USB pen. This is the safest & quickest method.
  23. [CQ] Re: Kyocera TASKalfa 2552ci drum replacement

    Yes lesson learnt. However many other manufacturers you can replace drums with the device on as opening the front cover cuts power etc.
  24. Replies
    5
    Views
    386

    Re: C224e strange message

    Try the NVRam reset tool this can help.
  25. [CQ] Kyocera TASKalfa 2552ci drum replacement

    Hi all,

    Just wondered if anyone one else has had the same issue, after fitting a new drum (K) with the device still powered on we get terrible print quality / black background & there seems no way...
Results 1 to 25 of 498
Page 1 of 20 1 2 3 4