it's a Ricoh wide format printer using Ricoh original inkt.
have no pdf
but see it as on a Ricoh MPC printer that you have color shift and you can do a color calibration.
With the MPCW 2201 it...
Type: Posts; User: djremixer
it's a Ricoh wide format printer using Ricoh original inkt.
have no pdf
but see it as on a Ricoh MPC printer that you have color shift and you can do a color calibration.
With the MPCW 2201 it...
hello
had code 280-02
after replacing bl and col inkthead sc was gone
but when printing color the image shifts (flue) just a little bit. direction paper feed.
I replaced the heads like on the...
ALL done what you say
: But it seems like a EU (global?) problem.
again done by RFU :mad:
under investigation
reader on SOP panel (by USB)
PID / VID is correct
like I said...... when installing SOP settings on client (IMC) everuthing works
when you reboot machine (hard reset with button) there is...
Hi
I have the problem on the IMC machines at some customers
When installing SLNX on IMC machines and installing latest step SOP-settings, there is no problem on logging in
When you put power off...
I said update firmware: cheetah is included in the package firmware!
and I also wrote that I changed a complete SOP. android isn't running on a CTL!
allready done, read first post
sorry Davel
this is not a sollution but a work arround...
and this is not a work arround for this client of 300 machines with streamline.....
classic app don't work with streamline
Hello
)
when I use the new copy mode and the fast copy mode I get "switching display.....please wait" after 2 seconds (and it stays
The old copy mode works.
allready done:
- new firmware
-...
Hi all
just little question:
to install ex. "remote panel operation" app or other you can do it with sd card on the panel and install from SD card
but you have also the option install from...
Hi
short story:
have to update equitrac on MFP (MPC3004) machines
after update there was no scan to me possible.
after searching the smartsanEX was automaticly removed (scan Gui),
so went...
I know this..... but client works with papercut NG so no user codes
this is a missing link for Ricoh.....hide settings menu if your are not administrator
hi
Is it possible to deactivate the settings menu on a smartpanel ex. MPC4504
only when you log in as admin
a bit like adresbook with extended security.
reason: a employer/student can...
no solution yet :confused:
they were update last week.....
but how can something starts itself than?
some machine start getting this and some others don't
same firmware and nothing was changed (no technical intervention)...
Published 05/22/2009 02:19 AM | Updated 10/06/2011 10:24 PM
Answer ID 106193 | FAQ ID 106127 | Rank A2
By default...
hello
on the metis MPC4503 (and early models also) I have the following problem: I mean the customer his problem ;)
when you print letterhead you have to set print switch 5 bit 7 to 1
and set...
hello
I have the same problem
machine 1 year old
no intervention needed
until now that machine doesn't wake up anymore
sometimes it does
SP5191 allready adjusted