I have a MX3060 that is working OK but when you try and go into Settings mode it just shows Please Wait and sits there. Not sure if HDD is corrupted or whats going on? Can I do a reset or anything or...
Type: Posts; User: Leebs14
I have a MX3060 that is working OK but when you try and go into Settings mode it just shows Please Wait and sits there. Not sure if HDD is corrupted or whats going on? Can I do a reset or anything or...
Printing is great quality, but when i scan or copy something the result has a blue hue background right across the whole page?
How can I clear this, can it be calibrated or someting?
We've had real issues with this model with the transfer cleaning section, it either seems to block up with toner which rounds off the shaft the driver gear sits or or the shaft rounds off first which...
Hi all, got one of these horrible machines which will not feed from the paper tray, feed roller not turning, looks a job and a half to get the drive or feed clutch out? AM I wrong?
Have a MX5070 with a U5-20 error, DF trouble, was told its probably paperclips on the board etc, couldnt clear it so have gone back with a new board, fit the board and get a U6-11 which seems not...
We are going to be looking at supplying these A4 devices in the New Year, anyone got any experience of them? cheap and nasty or are they actually Ok?
Thanks
Hi, yes it's a program called ALTO, my customer is an Estate Agent and this software allows them to create PDF documents of houses with photos and specs etc. The ALTO people have said it's nothing to...
Hi all, I have an odd one which I am hoping one of you may have come across before?
My customer is printing from a program which is on a hosted domain and not on their local pc, when they print...
Hey all, got one of these models and every few days it throws a F2-58 error, customer switches off/on and it goes away and machine works all ok. Where do I start with this code, What is a Process...
We have one of these machines and it was showing no paper in the A4 tray, then we found a paper actuator had fallen out so we refitted it back in and the machine now shows paper in the tray, but it...
Anyone had one of these printers throwing either a C-7100 or 7400 error code and you can’t get either the black or yellow toner out of the machine? The gears and cams on the right hand side are all...
Have a P6235dn and can’t access admin mode to change IP address etc, either says Username not registered or password is incorrect. Tried all the usual password suspects but no joy?
can you reset...
Thanks, you are right, it is a U5-20, I will order a board, would you order a motor, or do you think it is more likely to be the board
I have a U5-20 (NOT 30) error on a MX5070 which is miles away, after speaking with the customer, the tray lifts the original up to the feed rollers but it then doesn’t do anything and throws the...
Where was it exactly?
i will let you know but can’t see how the solenoid isn’t positioned correctly as its
fitted into place, but I will take your word for it and chexk
it out.
thanks
I have been looking at this problem in more detail on a Printer version in the workshop and i can re-create the issue by messing with the duplex/switchback solenoid, by momentarily moving the...
As per other reply, it's the transfer belt, probably a build up of toner due to the waste toner unit being blocked, common fault, new transfer belt needed.
Always found these DF’s to be pretty good however I have one which I playing up and randomly jamming, it happens so randomly I haven’t been able to trace the exact fault yet, it seems as if the feed...
Hi All, Did a call out earlier to a OKI MC853, which I haven't seen before and its making a grinding noise, i checked the fuser, transfer belt and drum units and all are well within life and all...
Hi, yeh sorry, it is Jam Code JAM0508, paper just fails to go back in after priting the first side.
Hiya all, I’ve got a M5526 that is jamming on double sided, the first side gets printed ok and the paper comes out the front then just stops there and seems to not make any attempt to go back in for...
Anyone had any issue with a colour drum blocking up with waste toner and breaking the plastic waste coil, replaced a magenta unit as the old one was blocked up, couldn’t see any reason for the...
Had this exact issue on a MX2640 and it was the PCB board on the side, the one with the SD Card on it. Replaced the board and it worked fine
Yeh really helpful thanks for taking the time to reply