Working on a MX-M465 with intermittent pour half tones. When printing 1 self test 64-05 looks OK. If I print 25 64-05 the 25th page starts to show signs of the half hones becoming splotchy and...
Type: Posts; User: TechGeek
Working on a MX-M465 with intermittent pour half tones. When printing 1 self test 64-05 looks OK. If I print 25 64-05 the 25th page starts to show signs of the half hones becoming splotchy and...
Yes check your PM
I had a new tech accidently reset the copy count with sim 24-06 and now when I request meter counts from my customers they are not right. When holding down the copy button it only shows the reset...
First off you should have never went into the TC 88 when you have a properly working MFP.
Was a 22-06 printed off before the 88-01 was executed?? If so print out the the 22-06 and compare the soft...
Quick question. Does anyone know how to tell the difference between the MX-3610 fuser and MX-3640 fuser? I have MX-3610 fuser that i just put in and it is giving me a H2-01 error so my guess it was...
Thanks for the info. I have been working directly with Brother support on this too. It sure would have been nice if they told me about this.
Has anyone else been having issues with devices using the TN-850 & TN-880 toner cartridges?? I am constantly having issue with one particular printer the most HL-L6250 but I have seen this on many...
Not sure if this has been resolved or not but check to see if drums are being coated and see if the main charge area is clean or dusty. If dusty with toner that could cause the issue. if not...
How will switching devices solve your issues with dealing with multiple billing codes? I have had similar issues and my work around has been setting their default printer with their own code and...
Working on a WC6515 and it has light prints. there is a solid image on the primary transfer belt. secondary transfer roller not not pulling image from the primary belt. I have replaced the secondary...
I have been getting a lot of calls on the 9010 series. Thought they are considered as disposal my customer think they since they spend over $100 on it it should be free form any issues. I have been...
Here is an update on my issue with the MX-2616N and the Mac OS. I logged into the machines web page a disabled the SNMPD and SMNP-Trap and it has been working OK for 2 days now. Time will tell.
...
First make sure CUPS is enabled
Open Terminal
type in: cupsctl webinterface=yes
close terminal
Open browser and type: localhost:631
now you are in CUPS
Any Luck getting this figured out? I have a customer with a MX-2616N with similar issue were Mac intermittently says printer is offline but is not but still cant print. Let us know what you ended up...
I am in desperate need of finding a place I can purchase new Canon MFP's and accessories from. Any suggestions?
I am in desperate need of finding a place I can purchase new Canon MFP's and accessories from. Any suggestions?
I have a handful of the IR1435 's that are having fuser issues as well. What has your experience been like since you first posted? Have you continued to see this issues and if so have you found a...
Hello Canon Guys
My company recently acquired another company that was a canon dealer but has lost there dealership status. My company's main line is Sharp but we want to be able to support the...
Hello Canon guys,
The company I work for recently purchased a company that services Canon products. The old company was a Canon dealer but lost their dealership and they only work with off lease...
Any updates on the new Drivers and Firmware? I have been checking often but none in sight. I need it for a Gemini2 MX-2616N on a network full of Mac 10.14's :(
Attached is a print sample of an issue I am having with a Sharp MX-2616N. They are using Mac’s for their computers and only seems to do it on images like PDF and JPEG. Let me know if you have any...
Our company sold a Xerox Veralink C505 MFP to a client that want to print on heavy paper through the tray not the bypass but i am unable to select the heaviest paper weight through the tray only the...
I just recieved a mx-m475 I purchased from an off lease equipment broker. After unpacking and plugging it in I am getting the same error F1-21. I have the RB22 and FX10. The error code says it is a...
OK i have tried swapping out all the memory and no luck so i guess is now to replacing the main board.
Update. I have tried swapping out the memory in DIMM slot 2 and this made no difference. I also performed TC 67-70 which is a SRAM clear but that did nothing as well. I have some more memory coming...