Search:

i have a bunch of new solid state hard drives and a few units needing new HD.
any issue using on a mpc401 or any machine using the small SATA FORMAT?
I cant see it but figured id check here first.....

wouldnt you see some over toning on that unit..
i have found on the mpc401 developer units they start to leak in the back and will wipe out 1st the gear on dev unit and then the add toner coil
if...

i take pics too and if rebuilding a unit for the first time i will take a piece of cardboard and draw where each screw goes on a drawing.
i tried to rebuild the fuser sleeves with the felt and lub...

simple buy a wireless extender,cheap 40 bucks or run a long cable.

thanks
i usually find wth 672 machine home screen just lags and never loads and after 4-6 minutes 672.on earlier models mpc3501,mpc3300 i dont recall ever getting that code...

how hard can it be to connect a patch cable???????????????

maybe i am snakebit but i have never had a 672 code be the HDD..most times the controller like posted b4...
If you can try to find a used board,maybe even post here

thanks
i am looking more at transfer units,fuser,and drum/dev even if i have to rip it apart to pop in the 07 housing...
if i need a board i can always buy a high meter parts machine..
sorta like...

thanks
IS it the same engine as the mpc305?
i was led to believe not all parts interchange??

HI
I have no choice but to move on from selling low meter mpc401 series to the mpc307 and mpc407 series.
Can anyone share the code book on what a tech can make interchange between them..
I tried...

from what i see there is only 1 solonoid on this sorter.
its on the bottom with a sensor.
i am pulling a mpc401sr sorter and i think the sr1000 sorter is the same for the mpc400sr..
i dont have...

for me sometimes the sc 672 takes a while to pop up and you can try updating via ricoh FW CLU PROGRAM VIA IP address.
it might code out during update like it did for me but i was able to do FW...

?????????????????????
Re: Ricoh C3003 fuser and C2503 fuser

http://www.copytechnet.com/forums/images/misc/quote_icon.png Originally Posted by StephenB...

saw plenty to buy but read they suck big time???

greetings
i got a text with a machine with intermittent sc797 code
no 797 in manual but a vague bulletin for sc797..
sensor solenoid error
i am trying to figure which solenoid in sorter b4...

the mpc250s has the shutter a PITA to align when you are rebuilding the fuser with just the sleeve and felt lub. pad...

if you are asking this then you must NOT be a tech...

i hate that code and had many mpc401s with it,control panel,connector usb to brd,firmware and the controller..
the issue too is if you check service code history that code never shows up...so you...

yes i have done it and i think you can move that pin in the main frame where the fuser comes in contact wth machine..
the only difference on faster machines is the lamps...

hi
no I had 4 other machines non canon to do part calls on and my meter in the street had me on a tight window.
also this is a free favor to a good account..on ricohs the internal sorter comes out...

thanks i just want to get this machine in the loop for a good account.

ok
1
can it be removed as an option?
i fix things if possible but dont need headaches or having to learn a machine i will never see again

hey thanks for the help canon guys...
i am glad i dont need to deal with this shitty bunch

ok.
So what gets unscrewed and does it pull out to the left or towards the control panel..

greetings
i dont service Canon much but have an accnt who took in a closed neighbors canon imagerrunner advance.
I was there last to service their Ricoh colors and took a look at it.
it seems like...