well for what its worth, i was surprised how easy i got that board out. the older Brother color laser MFC's were i thought a total pain to get the covers off and to what you needed inside. and...
Type: Posts; User: tonerjockey
well for what its worth, i was surprised how easy i got that board out. the older Brother color laser MFC's were i thought a total pain to get the covers off and to what you needed inside. and...
i agree, I cant remember changing a Brother board. some i should have since my soldering is so pathetic now to replace the USB jack.
and this one has a total print count of 12856, so its not near a...
i thought it was strait into the wall.
Good morning tsbservice, Happy Friday.
thank you for your input.
the issue here, is everything is intermittent to some degree.
that's why i am thinking the high voltage power supply. now...
did you check that the fuser "envelope" release levers (if yours has those) are in the plain paper position??
some did, others may not. but one way, applies more pressure than the other position.
Hello, at first i went to this for a burning smell. paper wrapped around the fuser film. cleared that and the film is worn and wrinkled. then i go to test and get the "Toner Error, one or more toner...
thank you Radiscar for the info.
i was thinking with the network port, i could hard wire to the extender. but i am reading the security settings and issues on the users manual, and i am wondering...
Hello, i have a customer that moved into a shared building and wants to connect to the Image Runner advance DX C357if with the Inseego 3000 mifi, wifi hot spot and their 12 laptops and 2 computers....
thank you. i found my 1gb FAT USB drive.
sorry about that. "duplex only"
so if it only jams in duplex, i would look for the foam stickers in the right side door transport.
those things that the paper is caught in.
those move up or...
well, as for the cyan and magenta streaks on the inboard side, i suspect that the ITB belt cleaning blade is bad. and as far as my research, those were no longer available.
it could also be what...
thanks guys. i appreciate it.
that's right, FAT 32 as well.
be safe.
Hello guys.
can this be elaborated on? is it best to load firmware upgrade with USB, or browser for a tech that is more old school? (old school)))
Happy Friday.
well, if you are trying to fix your own and have no experience, then it might be confusing or can cause damage to the fragile plastic parts.
i don't have a picture handy. what make and model are you...
as for replacing the adf. if you don't have the service manual, google it, or see ? partsnow.com or Metro fuser may have it online as well.
i think you take off the top rear, and upper side panels...
Hello, yes my experience with one a few years ago, i think it was making a noise or something, but not turning. I had to replace the adf assembly.
i cant remember, but think i got a refurb from...
yes it did. thank you very much. as i posted on the other thread, i was able to delete the border line at he trailing edge. still have an issue with the reducing it, but customer is happy, so that's...
thank you very much guys.
it didn't resolve the reducing or the image, but i was able to get rid of the border line at the bottom.
many thanks.
Oh thank you so much. I'm going back out there now and give it a try.
Have a very nice day
do you guys know if this adjustment is applicable to the laser jet enterprise mfp M527? this one has correct lead edge registration in ADF, but its short on the trailing edge by about a 1/4 inch....
Hello, good morning.
this machine has several CQ issues. the main one is the copies are reduced by 4 mm top to bottom but not side to side. so they get a border line across the bottom of copies thru...
Hello, and thank you.
i will try to get that posted here tomorrow.
have a nice evening.
this is the updated diagnostic screen display after waiting the full 10 minutes.
i do believe it was over 10 minutes. i am waiting on the answer now.
my wonder, i believe it was working fine up until it had the developer unit replaced, and was then started showing low toner....
sorry, femaster. my spelling is bad