Search:

hi

Menu # 9000*529 Call Service Clear

550 Memory clear

710 Memory clear except History data
:cool:

سلام
اگه اکانت تلگرام دارین شمارتون روبگین براتون ارسال کنم

Hi
If Yellow toner is on drum but it is not on transfer belt ,
it means toner cant transfer from drum on transfer belt,
and it may be cause:



1-Yellow primery transfer roller inside...

Hi
Please check and replace 3 gear above fiusing (Gears of Exit roller) and 2 gear on right door

4287742878

And besides on top of you head.. you point is too ?

But if you refer to Copier Tech site (www.copierfirmware.co.uk)

you will see that they selling firmware ,it is in uk not usa

and usa is one of world countries not all of them

I thought it was a forum for exchanging information, increasing the level of information and solving problems.

If you intend to sell,

Or you have not yet been able to sell well,
You can get...

Hi

If anyone have 2016 firmware and SST,

please send me copykar.ardebil@gmail.com

Thank you

Hi

Code in mode 05

Scanner related (a) Reproduction ratio of primary scanning direction adjustment => 4000

(b) Image location of primary...

thanks all

The error was removed by replacing the black drum

While there was no scratching in the drum surface

:cool:

Thanks dear friend for answer

When prints separate color test , prints are ok

but when print picture or test print error is still come back

Hello Friends

I have a problem in konica c452 Specific noise on prints,like test below

39248

I checked transfer, fuser,Images
In your opinion Is it possible firmware or NvRam?

Someone...

CC165 error code after updating the firmware on the machine.

Solution


PROBABLE CAUSES:



1. There is a model mismatch between the machine and document feeder.

Hi
1-Check ICP18 on PRCB
2- Check PRCB
:cool:

Hi
You can download from:

https://dfiles.eu/files/euwsqrudk

:cool:

refer to :

http://www.copytechnet.com/forums/konica-minolta/104260-bizhub-c452-errorcode-c-dc10.html

:cool:

[Cause]
The width of the transfer belt cleaner gear is insufficient when engaged with the cleaning motor gear.

[Countermeasure]
The contact width of the two gears will be extended from 5.3mm...

send your email

:cool:

The 49.xx error is an error recognized by the printer's formatter and/or firmware. This error occurs when a type of information received by the printer is not understood, too complex, using a certain...

Hi
You must update firmware

http://www.copytechnet.com/forums/images/icons/icon6.png

Procedure

1. Check the connector between M11-MFPB CN15EA for proper connection and correct as necessary.
2. Check the connector between the fusing unit-relay CN98, CN99, CN104-MFPB CN13E...

34983

The problem probably lays with the toner sensor.

Try P, *, CA,# > 80 > 2 > reset to higher value, start with 10, if you go 20 or more the sensor in the DV unit is probably gone

33682

Hi

Do you write (Reset NVRAM TOOLS file) on 128MB Cf card by using (Firmware Imaging Toolkit 2006) ?