Thanks, that bulletin works fine for me on a MP C307 with SC672-00!!!!
Type: Posts; User: menosmola
Thanks, that bulletin works fine for me on a MP C307 with SC672-00!!!!
Forgot to post the solution... To whom it may concern, the noise was caused by the gears of the fusing unit.
Can i test it? empi_res@hotmail.com
The answer is simple, it is impossible to scan both sides of an ID card and for a single file to reach the PC on an MP C3003, you would have to use some type of editing program after scanning both...
Hello, I have a client with a Ricoh mpc2003, he sends me this video. Can someone identify from the sound what kind of problem the machine has? The machine seems to work perfectly. I think it's the...
In this case I think this solution from Pixtech is correct
Thank you all, the problem was in sensor 20;)
I think that S26, S27 and S28 sensor are what im searching.... thank you very much!!!!
Then I will tell you if it has been solved
Yes, thanks, I've looked there before, but I haven't found them, I don't get along with this type of manual, I'll try to look more closely...
Those are exactly the sensors I want to change (C0-10813000). I have read that they have quite a few problems. Specifically, they are the paper pass sensors. There are 3, but I don't know where they...
Hi, i´m searching for this manual...
I am a ricoh technician, but a customer has this machine and wants to fix a problem he is having with jams, I need to locate some sensors to replace them.
Thank...
Well, the client has vision problems, so I have done what I could, he has been happy, so all is well that ends well.
Ok, I have solved the problem by changing the PCL6 driver settings, i have removed all the brightness, only in the text option and it seems that the client is satisfied... :p
I say that the quality of the prints is perfect...
Hi, i have a customer that insist that the prints come out too much lights. The machine has few copies, original toner, new pcu, new fuser, new transfer unit... this client has regular eyesight.......
From the service program check the op panel configuration, it is usually changed between SOP (1) and NOP (0)
SP5-748-201 (smart operation panel connect setting) from 1 to 0
Thank you very much, that was exactly what happened.
It has been solved by changing SP5-748-201 (smart operation panel connect setting) from 1 to 0
Thanks, but, no, in admin mode does not appear either
Enviado desde mi Redmi Note 8 Pro mediante Tapatalk
System settings option button for configure the buttons on the left of the screen (copier, document server, fax printer, scanner) is missing
Enviado desde mi Redmi Note 8 Pro mediante Tapatalk...
I think you have not understood me, what I want is to SCAN (not copy) the two sides of an ID to a folder and that a single-sided file arrives on the PC.
In copy mode, i use 4 in 1 and 100% scale, but for scan Mode, those options are not available
Enviado desde mi Redmi Note 8 Pro mediante Tapatalk
Thanks, but the copy mode is not a problem, the problem is the SCAN mode
Hi, an easy and old question:p, is it possible to scan both sides of an id card on a single page with an mp c3003?
Thank you.
has something happened with the nv-ram of that machine? The machines come from the factory with exact values for scanning, contrast, brightness, color saturation ... Look for the sheet with the...
I tried a engine reset after backup, firmware update, change power board and ac control board, but nothing... I'm stubborn, I'm going to keep changing things....:mad: