Thank You! It was actually SP 5895...Application Invalidation...Printer was set to 1 for off... When I changed it to 1... Bingo ! It worked.... Old Post from "Elmo" Appreciate all the input as...
Type: Posts; User: laser801
Thank You! It was actually SP 5895...Application Invalidation...Printer was set to 1 for off... When I changed it to 1... Bingo ! It worked.... Old Post from "Elmo" Appreciate all the input as...
Thank You! It was actually SP 5895...Application Invalidation...Printer was set to 1 for off... When I changed it to 1... Bingo ! It worked.... Old Post from "Elmo" Appreciate all the input as...
Thank You! It was actually SP 5895...Application Invalidation...Printer was set to 1 for off... When I changed it to 1... Bingo ! It worked.... Old Post from "Elmo" Appreciate all the input as...
Thanks for that info... Appreciate it!
Thank You! This is an "Off Lease" machine we picked up from a warehouse in Fla. ... Not sure of the history... I'll look into it further...
Hello All! Just got a machine in, and for some reason the "Printer" Application is nowhere to be found ! I looked thru everything... Not in Classic Apps , or anywhere in the service menus.... I...
Thanks for the input...The machine was in the Service Mode... I had to get them some toner anyways so the trip wasn't wasted... Appreciate it!
Thanks! I did go there and the girl told me someone from I.T. was there... They did put it into the service mode and left it..
Hello people... Never saw this... Just got a call from a client... On her MP4002, She said, only when she uses the ADF, She gets that Diamond background pattern as if you were in the "Service" Mode...
This is Laser801... Just wanted to share the results with all... When I put the Pico in the correct location on the connector, The "Reset" was a success ! Not sure where I heard to put it where the...
Thanks for your help !
Playing with a machine with a SC545 now... Going to try putting fuse in different location...Thankyou!
Thank You for that info ...Much appreciated ! Laser801
Sorry... I replied in length down below... I respect your thoughts on this...
Thanks for your response...Well, We have actually been trying this "Known good" Fuser unit with the "Good" Pico Fuse on three different units... One had an SC545...One had an SC554...and the third...
Hey Folks... Working on MP 4055, Has a Fuser Error... Putting in known good fuser with new Pico fuse plugged into the connector where the blue loop is... Trying to do Hard reset, 5810 #2... Fails all...
Never mind...I found it ! in the Memory Clear section...#5812 Thanks !!
Hello out there... Trying to delete the old "call for service" phone # on the top of display on a Ricoh IM C4500... Any help would be appreciated...Thanks in advance ! Laser801
Thanks, I will check that out...
Hello all ! once again, on this wonderful Friday... I could use a little help... I took in an MP4055 that had a Card Authentication Option on it and I removed the hardware completely from the...
I will check with him... Thanks much !
Hello all.. I've been asked for help by our I.T. Person on a MP501... He tried to set up 2 of these...One was successful that had RXSPSERVLET on board and the other was unsuccessful which had ARGOS...
Thanks, I'm heading back out Thursday with another unit (IM 430F)... Once I get this all set up she should be fine for now... I'll get that big one back to the office and dig in ...
Yes... I'm going to be getting another unit in there for now... When I get it back to the shop, I will look into that more...Thanks for the input...
I'll give that a go ! Thanks