Im not sure, that cloning will work on the printer harddisk, it is better, to install a new one and do an Altboot
because the harddisk are encrypted at the end of the Altboot process
Type: Posts; User: LamsterPaul
Im not sure, that cloning will work on the printer harddisk, it is better, to install a new one and do an Altboot
because the harddisk are encrypted at the end of the Altboot process
sensor look ok, at drum rotation, you hear a lound nois from front bearing,
at my other CQ, you feal a resistant when turning the real drum bearing, before it was replaced, now he works again
thanks, Colorqube Nr. 1 will work now (rear bearing was fault)
now the second Colorqube have the same problem, but with the front bearing make some noise :):):) :confused::confused:
we had now an...
It works again, the fault was the rear Bearings looks like it was the fault, now he works again,
I had replace the Pully with the Bearing,
but too late, we had order a new AltaLink c8035
I Need to remove the complete drum to check it,
so it Needs some time,
before the Problem are started, I heard a lound noise from the back side at 3B, like an bearing or somethink, but then the...
What you think over an DC 250? i can get one cheap, I think, its the best solution,
mayme I will remove the rear bearing and check it, but first I need the right tool for it
thanks
could this the problem ? For the drum Also ?
CPU fun for the Mainboard in the Drawer in the back ?
in PEST-History I got the error 99-214 (24V Power not stabile)
could it also be the Problem ?
I´m on the end now,
sometime he will print 1-2 cleaning page (empty ones), that the cleaning with the...
THANKS
I try to use the Diagnostic mode with Drum,
when I remove the Tranfix Roller at the Test, it will past the test,
If I install it, it will fail, I think is was the Problem, because there...
I´ve replace the old belt with an new one, but got the same issue, It will not work,
Andy other hint ?
or I Need some calibrations too ?
thanks, I will try it, it got am second new belt in stock and I will try to mount this
Paul
Cleaned the drive with brake-cleaner, but with no success, maybe I replace him, with an Altalink or Versalink 8035
I spend very much each year, to keep the 2 CQ9301 running, allways problems with...
I got an Colorqube 9301 with Shows error 94-534 (Drum Drive Belt slip),
I´ve allready replaced the Drum-Belt (was wearn out) and cleaned it,
the I replaced the Drum Drive Position Encoder on front...
After reset the Admin password and deactivate the USB security on front and back USB, now i had make and Altboot over USB, and all works fine, also NTFS-Usb formatted works well
thanks for...
have the the 2 different Software versions too,
I got the cable for the CQ9301 (make by own - from a Telefon cable) but i haven´t find the connector on the SBC board on the 7835
thanks
Paul
I got an old version on my laptop, it should work, but i can ´t download the newest software for it
I´m Looking for the Xerox PWS Programm to reset an WC7835,
someone Change the Admin Passwort, so I can´t go in anymore,
and the USB Looks like disabled,
I´ve try all to do an Altboot from USB...
Hi, I replace the complete PreHeat Assembly (801K37710) and the fault was gone
Mean you this seal kit ?
Xerox: 607K03170 ?
will it work with this seal kit, or it is wasting time ?
https://youtu.be/jiMLCL1JIRc
and this really works and solve the leaking problem ?
I was today om the machine again, the fault was 99-061 cable video printhead 3,
the error was from the ink, that was melted the printhead cable on the head,
so i replace it,
also error 91-698 was...
Thanks
the printhead installing was not so difficult,
I also had replace the umbilical kit on an other maschine without problems,
the ink was comming out from the printhead on the PCB board, not...
Maschine was not moving for days,
print was around 35.000k color pages,
i have replace it, after this fault,
i did not replace the wiper,
the ink was exit from the printhead directlly,
I ´m not...
I had a big problem with my 2 colorqube 9301 machines,
after a faultcode I open the the machine and i see, that the upper printhead looks like, that
it have a ink leak inside and the hot ink was...
Yep, has a service manual,
have working the process trough, but the error will still come back,I think the sensor or the unit was faulty, so i order a new one, and hope it will work
have someone a hint where the fault was or knowing Issue, for the Error 89-520-00 Home Sensor Timeout RAP ?
DC625 Calibration also will not work
thanks
Paul