Hi all,
what do we all use for our tools…. ?
hard cases,rucksacks,laptop style bags…..?
Type: Posts; User: raider
Hi all,
what do we all use for our tools…. ?
hard cases,rucksacks,laptop style bags…..?
Hi All
we have an mpc5503 with fuser offsetting
it is on b/w or colour, A3 and A4, middle of day or anytime of day...
oem toner, 125K blk and 25K colour on the clock, latest package firmware....
Hi All
what lubricants do you guys use on the different areas in modern mfp's ?
And which do you think cause more problems than their worth.
Regards
Bandit
Hi all
we have an mx2614 with C4-00,
so far fitted the ptc corona, the modified ptc hv pwb and latest mod shafts and black plastic clutch housing.
it has unfortunately come back again...... :o(...
Hi Guys
Bit of a head scratcher this....
customer has x2 mpc4503's
if you scan an image from mpc4503 number 1, colour, to their pc it looks fine on the monitor.
but, if you then go to print...
Hi All
we have a new out of box 2555 throwing up e013 jam almost every copy.
done 05/4579 but still keeps jamming
any ideas please guys ?
Hi All
I have a brand new install on a HP Designjet Z6200m, all running fine except the fans are constantly humming away to themselves......
no apparent issues and all rest of system tests out...
hi
quick update
machine was pulled by sales......machine dissappeared into the depths of the company never to be seen again !!!!
so sorry but no final fix.
hi
just an update
ricoh took a look.....finished up pulling machine and scrapping it !
hi
just an update to help others
replaced the ribbon cable from the staple unit to the pwb....all ok now.
Hi
i have an mx6201 with an fn4 finisher, it will staple fine at front side on single staples but when on normal or rear staple it goes into f1-10.
the machine stacks the paper at the tray ready...
hi
thanks for the promt responce
i wasnt involved from the start of the problem but i will contact the engineer on monday to see if firmware was done prior to the issues.
i did do it when i...
HI ALL
mpc 2051 originally fault reported was "adf dead"
you put riginal in and hit start but doesnt feed......my co worker decided on the bcu pwb..and that worked for about half a day.
we both...
Gents
first off, apologies for the delay in responding.
the fault turned out to be the mcu pwb, just swapped the nvram around and switched on......
thankyou for your replies chaps.
regards...
hi
we have an mxm200d with black copies.
self generated prints are fine in 64 but copies are black.
with it only happening with an optical scan we thought it may be the ccd unit, it was swapped...
Hi
we are having odd jamming issues with the fn22 finisher on a polaris, it is comming up with eratic fs203_n jams.
The sensor has been changed a couple of time s,and has cleared the fault for some...
thankyou sir.
i was having a bad day........
Hi All
i may be going mad but.......the sharp mx5112 still takes mx-510gvba for blk dev doesnt it ?
hi all
we have an mx3610 that when doing colour prints with white letters within a black background ...the letters have a tinge of magenta in them which makes the letters appear pink rather than...