Mine was a yellow developer unit depleted of developer...tiger striping. Ran b/w fine...no color
Type: Posts; User: aficio63
Mine was a yellow developer unit depleted of developer...tiger striping. Ran b/w fine...no color
Gooses guide has listed issue of: itb/drum motor lock/main motor lock/Image transfer HVPS/ different models but the one you are having problem with
I have similar issue with a school that has 12 MP C4504's. Half of them have the Postscript3 SD cards, but other half without. More Mac users are coming in and cannot print to the devices without the...
Any error codes?
Have you tried to power up the device with the HDD disconnected? This should rule out other possible parts; controller, pcb's, etc
SC672-00 Communication error between operation panel and CTL after machine is powered on.
Possible causes of SC672 include:
• USB communication path failure (USB cable, IPU)
• CTL boot up error...
Gear #18 is on the developer drive assy....not the developer itself i take it.
Thank you for the info.
Will a process unit for a 3015A work in a 5015A?
Had the same error. Replaced hard drive, loaded latest firmware in download mode. Fixed problem.
Was this resolved?
Whats the deal with the agitator drive gears on the black dev unit? I assume the machine will run without these, as the previous dev units did not have them.
Hey group...can you import a csv from a Savin to a Canon Image Runner Advance?
I am installing 2 Canon's in place where 2 Savins are with over 2000 Dept. ID's.
Yes, I cheated the interlock and held the bottle in...no change.
Forgot to list these items on the laundry list of things done.
I did replace these 2 items as well.
Where is the write up to get to the blade?
Greetings...I have a MP C3004exss with this message. I have tried:
a different cartridge
checked all connections in controller
replaced:
rfid pcb
bcu pcb
I/O pcb
HDD format
Any help would be...
I know this is an old post but did the HV board fix problem??
It did. 4.10 resolved issue
Tried to set up through laptop direct to copier, no go.
Interesting...I have the identical model with the same scan to network folder issue. No matter how the path is set up, will not authenticate with the same message.
I have a L3 support ticket open...
I have received 2 "new" PCDU's that appears not to have any developer in them. Has anyone had the same issue with a new unit? I removed the developer unit to check, when rotating mag roller...no...
Thank you for this. Do you know if these gears are timed, or is there anything in the PB1100 SM for replacing the gears in this unit?
I have a paper feed unit for an SP5300DN printer. Client broke the push switch for the tray which is in the actual drive unit assembly for the feed unit. I cannot find the part number for this drive...
Thanks. I did try another toner. I was trying to get to the contact in the back of the housing, but it was hard to tell where exactly the contact happens.