would like to give an update to this. changed the Heat Belt Encoder Assembly and that resolved the issue for whoever runs into this problem
Type: Posts; User: lion_heart
would like to give an update to this. changed the Heat Belt Encoder Assembly and that resolved the issue for whoever runs into this problem
I do find it weird that the belt would slip, as there are plastic stops kinda to both sides of that big gear that the belt goes on, did you place it correctly around the pully? and there are two...
Ok, i find that weird that the problem would re-occur that fast after changing the direct pipe, in my experience that doesnt' happen, it is recomended that when the direct pipe is changed to change...
Good day, i know the headache you feel, change direct pipe assembly 052K13213 it's usually one gear in the back that mess up. but unless you know what to look for kinda hard. they do sell the gear...
thanks a mil. can you elaborate just a little more please on what to check thanks.
thanks a mil. can you elaborate just a little more please on what to check thanks.
Good day, still have the same issue. but the strangest this is this, it only happens on long sheets, eg. 11x17 or 12x18, if i am printing 8.5x11 or smaller the colors are aligned and print perfectly....
maybe if you don't like something YOU just don't do it, I have purchased manual from him, and let me say this, he is MORE than helpful, even before purchasing he would ask what is the problem I am...
this is a next example
yes it is in paper feed direction
i print mostly on 12x18 and 13x19
this happens on 120gsm also on 300 gsm gloss if that's what you are asking
good day, been having this issue for a few weeks, have changed all the drums, and it happens with various colors, as you can see in the photo (this time looks like cyan) it is off by a few mm.,...
thanks for assistance what is bigger lock of bush? i am just into the versants been using 700 for years, so lost when it says that
good day, have a weird situation. under and by the drums. toner is piling up there, especially under the cyan and ends up dripping on printed sheets, as you can see with the picture on the floor,...
You happen to have a part number for that??
good day, getting this error on my 180, any suggetions?
got brand new cables, same error any other suggestions?
sorry for the late response, software version 80.43.51, the two fans on the input of the cables on the halftone pwb are working, I swapped the two cables and reseated the card inside the fiery...
just purchased this unit, installed and was getting a 044-397 error, swapped the cb ym cables and that error seems to have gone but now I am getting 045-393, not seeing info anywhere on this code,...
good day, xerox 700, if you look at the image for some reason the bottom of the file is printing blurred, if i leave machine off for a little while it works, but if i'm printing for a bit it happens...
Update, good day, was looking for my old post to update couldn't find it. still the same error with EX Fiery with two of my 700 machines, soon as I send a print job, the 045-360 would appear. had a...
Very weird this one. Good day all, xerox 700 045-360 error constantly, won't print one copy, Efi external Fiery. one of my next machines went down and so just trying it out, moved this machine to a...
Good day, just wanted to give an update, changed the developer drive clutch and it works again. thanks guys for assistance.
yes thanks I did, that developer unit is fairly new, and I replaced it to a next new developer unit. xcopytech seems to be correct with his assessment as the black developer drive clutch is broken....
I guess i was mistaken on parts as this one in the photo is what i had changed with the long shaft that I assumed spins the developer48210