I have playing with the bias up and down, same stuck...
I have change 3 times the separation unit, same stuck...
Type: Posts; User: cristian
I have playing with the bias up and down, same stuck...
I have change 3 times the separation unit, same stuck...
By accident i have 3 types of paper here. I have tried with all 3 ...same thing.
1. Printing is good.
2. Bias indeed higher - 190, i will move it to 160.Keep you informed.
So, papers are stuck by the drum separation claws, and many of them enter under the drum in the toner recovery room. I have changed the drum unit , the same thing is heappened.I have re-replace the...
Problem solved. I have reset all the NVRAM settings according to Minolta buletin/ all active solutions, pag.88, i have replace the values for the image process and dipsw as before and everything...
Thank you. I have read the manual. But can you explain how my Bizhub 600 who was in C2401, is now working after i have replace the memory parameter board with one from an Bizhub 750 ?
I have put...
Bizhub 600/ error code C2401.
I have take from a working B 750 the small board with a big condenser from ICB(parameter memory board 57AA 912 1) and I have replace it to the damaged Biz600....
Anyone know if thew IPB (image processing board) from a Bizhub 600 works on Bizhub 750?
It give me C 2401...with 2 separate and functional boards from an 600 to an 750..
Anyway, I can confirm...
Does anyone know if it exist a part code for an Konica Minolta Bizhub 600/750 Drum Frame- but only the plastic frame (cracked), without any other components. I have found 57AAR71000 code- but i need...
problem solved. The screws from the charge plate were unloose.
The first copy enter in the fuser with the mark on it. If it would be the fuser plate then it should heappened also on the back face of the paper who remain clean and the quality OK.I have also try...
I have change the drum unit with one from another machine.The problem remain. The paper from the photo is going out A4 normal. It is heappened also with A4R, the distance between the exit edge and...
have a problem with the image. Only for the face - not on the back of the A4 and A4R paper as in the attached photo. Any ideeas about the problem ?34737
For an Bizhub 750.
I have not auto toner suply. What i have notice and done:
- door sensor is OK
- in output: i have give SW 1- OK- the toner bottle is turning OK
...
Thats exactlly what it has tried before, on 2-3 of his own machines, the guy who sold me the machine- to redirect the waste toner. The solution is good but a little bit hard to aplly in...
Thank you. I will try to check the pins from the BICU board, cause i have changed the scanner with a functional one from another machine and the deffect remain.
Regarding the sensor, when i have a...
I have remove the scanner unit (whole the upper part of the machine)to be able to change a sensor after the fuser, and when i put it back , the machine is half death. I have OK the upper green light...
Developer only.
The purpose is not to save money, but making as lower as it can be, the number of interventions in the machine. The reality is that > the B 750 that i have buy and running with DI 551 toner, works...
when i make copies with 1,5 US cents/pc and only the electricity cost me 250 USD/month, i am obliged to...
The copies are very OK for aprox. 1000 copies. Then it appear a very easy enlightment of the copies. I push the door swich, the cartridge make a few rounds and the quality comes back to normal, and...
Lets explain:
i have buy a B750 and the buyer told me that i not need to change the developer for a very long period of time.The settings were modify- dipsw 5 (1 and 2 to 1)and 27 - 2 and 3 (not...
Bizhub 750.How can i make copies with the toner door open, to be able to block the toner admision? I know that after i give start to a number of copies and then i open the toner door, the copies will...
I need a compatibility fuser lamp type for an Bizhub C352? Because the Minolta guys insist that I should buy a new Fusser assembly...(if you have a flat tire you would buy another car ?)
I have try to "unset" one by one, drawers 2 , 3 and 4, but without succes. Anyway, the movement for drawers 2,3,4 is transmited by a different cinematic chain than the movement for the drawer 1,and...