Search:

Sad seems like this tech page is going down the tubes with helping fellow technicians since I've used it last. 🖖🏻

Thank you for non constructive response. Hopefully you feel better doing so. FYI I've been a technician that works on anything from a-z that uses paper since 1980... That yes sometimes I ask for...

Toshiba 7508 black and white machine. Background like it's losing bias. Technician performing preventive maintenance replaced drum unit charge units development unit developer. Possible cause ITB...

Was the main pcb. Talked to hytec who we got a new Pcb from said it's common. A chip heats up looses solder connections

Out let's checked. Nothing found as cause when checked. Need answers what's needed to fix 6575 then worry about others. Will be putting machines on a new ac circuit to be sure wall power doesn't...

Sorry meant to say. I took random readings on the PCBs in the back and I get DC voltages. Now I have a Canon c5550 and c615 At the same location with same problem. Definitely sounds like there's...

Checking random spots get 12-5-24

Have a similar problem on a canon 6575. I do have 12 volt DC on back of machine. Click on link to see symptoms
Shared album - Joe Foe from Buffalo - Google Photos

Lol Canon tech support recommending changing the processing board on the finisher...=$$$... I don't think so I'm that guess

Thank you.. That's a possible fix. I've already cleaned everything nothing looks worn. We're considering I'm buying another machine used with the finisher from Canon. Start swapping parts without...

Yes for some reason it kept on telling me to resubmit the post.
There's no obvious wear and tear and any rubber or parts.

Tried taking a educated guess.. replaced the paddel drive assembly fm1-p348-010

Problem is not from the machine took the J1 finisher put it on a different machine same problem. Only happens on single copies/prints and is random.
Watch these videos till the end.
Canon J1...

Problem is not from the machine took the J1 finisher put it on a different machine same problem. Only happens on single copies/prints and is random.
Watch these videos till the end.
Canon J1...

Bryce 13K. Rebuilt like new condition $2,500. Click on link for details if not sure what 13K is. Call 716- 712-0722

Secap (Bryce) 13K Tabletop Address Printer

Canon machines/parts From a-z available. If we don't have it in stock we can get it ship it. Copiers, MFS's, wide format printers/ scanners. Say Joe sent you..Contact

Ark Digital Imaging -...

Looking for a Formax fd1506 service/parts manual. Need to know specifically how to set the pressure rollers to factory spec so any of the formax service manuals should have how to. Not looking to...

Need Pitney Bowes DM Print heads part # 771-1.

rz an ez drums can be made to work in one or other with a kit riso made. I have one. Call 716-832-4950

44300

44299

Little use trade in that's in great shape no issues. Call 716-832-4950 ask for Ward.

We have a sc3000. Call 716-832-4950 ask for Ward

All good. Possible cause main operator likes to when has a near empty ink puts a full one in so if she's not around no chance it runs out. Then puts almost empty back in to let it run out when...

Join Date
Feb 2009
Posts
357
Post Thanks / Like
Rep Power
0
Re: Riso Gd9630
Put ink in this morning ran my sample test. Had operator run a job same code. Went in tech mode did nothing backed...