Remember you do not know how much toner did you have so you should change toners anyway to avoid future problems. I suggested to buy one chip to check if this was an issue.
Type: Posts; User: Jack79
Remember you do not know how much toner did you have so you should change toners anyway to avoid future problems. I suggested to buy one chip to check if this was an issue.
Yes that is very interesting why copies not prints are so affected. I have seen this problem on WC71 72 series as well on 71 72 drum and developer coming as a one unit.
I have just removed developer assy and found that mag roller is not fully covered. I do not know how I could missed this out yesterday. I wasted time yesterday but finally problem is solved.
Hi.
WC7855 prints white line at the same place on black only as per photo.
Cleaning itb ass did not help
Changing whole itb ass - no change
Replaced r1 drun - still the same line
Swopped lph...
It looks like drum problem. If they are fine then transfer belt assembly but I would start with drums first
Try clean MOB sensor.
Instead of buying toner cartridge you can buy just SOLD toner chip and replace it with chip currently installed in your toner cartridge.
Make sure you have ordered SOLD cartridge not Metered...
If machine does not ask for a supplies pin then buy only one SOLD cartridge (or chip) to check if it will be accepted.
Hi
How to check when the metered contract will expire on VL C405. Is it any nvm to read?
Probably something stick to your magenta developer mag roller.
Check if scan icon is not just hidden. You need log on as administrator and then go to Tools,
touch System settings>Common service>Screen/Buttons settings>Services Home>Change settings and choose...
You need a fresh image loaded into sd card - not copied from other working machine.
I would start with replacing drum. By the way when cleaning your printer how long have you keep drum outside the printer? Was drum exposed to the light or did you cover it with black sheet or hide...
I have seen this code and the exact issue many times on different models like WC7120 etc. It was always related to ITB Unit. Some people declared that replacing 2nd BTR would help but it never works...
Check if central upper exit tray is installed properly.
Hi
Does anyone know if Bypas tray assembly from WC 7525 will fit into 7835?
My friend can get you reset file for £10 but you need send the machine serial number and total page count. You cannot print also before receiving reset file because the code depends on the number...
To reset admin password you need to send special reset file to the machine.
I think he has done NIC initialization. I would reload fw next but it seems he has done it too. Maybe try print from yor mobile through the network.
Your toners are less than 10% anyway.
Login to web interface and go to supplies alert. Change toner days to 0. Save and restart copier. No more exclamation point :)
Have you tried another network cable? Maybe check if ethernet port is not broken.
If copy from glass is fine then clean slit glass both sides but I would clean all optics.
If copy from glass is fine then clean slit glass both sides.
I would replace the fuser first and if this not help then fuser motor but I think replacing fuser will solve your problem. Just make sure you got fuser for 7830/35 not 7845/55.
Make sure he installed the correct fuser. Fusers for 7830 7835 are not the same for 7845 7855.