I answer you by private
Type: Posts; User: charly
I answer you by private
This is the information that i have it.
I have had some problems with the ´tcr´connector of dev. unit. and sometimes with the connector process assy, the value of tcr cyan was 0
master-of-repair.blogspot.com.es/p/konica.html
thanks you very much.
Hello, I've been looking for the firmware GM6-31 in d-box web and CSES and have not found anything, please where I could find it.
D1 firmware maybe take active switch software 51???
thank you...
I found it a few days ago, thank you very much
i have the service manual, but I dont see anything about this or maybe I am blind
how to reset message periodic mantenaince in 4800w
perhaps the main charger have leaks
I'm with tclar, generic toner and duplex cluth
maybe because the printer system ,the total counter account prints of copier and printer
the registration powered by motor, no clutch
so that the actuator of the regist switch have not the spring or switch is bad
¿the image is delayed or in anticipation?
administrator code 6000 or 6482
service mode 10871087
change dv510c, or better ,burn it
when you do not work on smb you can also use the latest version of the file utility
many of problem that comment are solved with last update (Firmware Version 09.01.0010),the noises, not of course.
km 1510 used the 3 digit codes
a 400----laser scanner unit issue-----polygonal motor blocked-----try to unlock it and if you fail you will have to change
the atachment kit ¨AK 71¨ not working well, the white guide paper does not run properly
Check for dirt between the touch screen and the plastic control panel.
but if so you will have to change only the touch screen
I have changed some in these models
Last Update is for all models. version 01.00.0030 2010-03-04
what history
all this is checked, but on new machines????????
anyway I got the new firmware.:):):)