replace yellow drum , solve the problem
thanks
Type: Posts; User: ps22sp
replace yellow drum , solve the problem
thanks
see attach file
change mob sensor assembly not change much
try to replace magenta developer that recently replaced ,
red color come out output normally,
four color developer recently replace just a month...
61979output color supposed red ,but it shown more yellow in red
this is the machine xerox wc7845
any advice are welcomed thanks
replace mob sensor
on the left of black developer problem solved
see attach file do the calibration wc 7845 the output see attach file
any comment are welcomed thanks
after check developer and replaced just near black toner left side there is a fan lose the...
<br>
not simple ---<br>sometime running the machine , it will shown the #3 lite on some times error message d04 560 <br>ink tube has a pwb tag reader ,could it be the reason ?<br>
not simple ---
sometime running the machine , it will shown the #3 lite on some times error message d04 560
ink tube has a pwb tag reader ,could it be the reason ?
=====================
problem solved
392,312.00 (yellow) 392.313.00 392,314.00 (magenta), 392.315.00 (black)
enter into service mode change value in nvm
752 346 (yellow) 752.347 752.348 ....
after replace cyan developer a flat cable socket not connect
cause the code 392.312.00 392.313.00 392.314.00 system error message
how to erase error message thanks
drum and developer motor unit...
print drum area 3 lite on when
press position left and right arrow ,then turn on machine ,
any comment or advice are welcome
thank
this is output from xerox wc 7845 when replace black drum
on the top left corner a gray dirt shown on the paper when output
this output priint 11X17 gloss 100 lb text ,the output dirt is near...
this is the wc 7845 print calibration output
53010
develope problem ?
any advice are welcome
thanks
thank your advice , today i already print overnight , then this noise happen ,just an hour ago , i try to took out transfer belt ,and check out the clean blade ,the gear stuck ,that is the problem,
print from bypass tray , 80lb cover 15 sheets ,out from center
every time warm up ,now
start up warm up gear noise very loud ,like gear not engage
from transfer belt end screw or fused side...
it has been long time ,when the master shrink ,i readjust the position of master before printing, so the master touch the rail , this action i did so many times,,
at first , i check the clamp plate...
here are the pics master mount on print drum ,the machine is rz 390
master making , i took the pic s
one is begining ,clamp plate
the last pic 1070 is end of master
1070 is the end master
any...
due to replace the drum cleaning blade , something wrong on installed the blade ,only printed out two copies then check the drum blade .and do it again ,installed the drum cleaning blade correct ,...
i found the parts on internet , items inc .i bought the xerox pro 35 part from them several years ago ,
i took out the board (xerox 7845)assembly and see the SDHC the part number 237E27204 lexar...
604K84736 this i found on internet original version 07204000409100
machine load version 073045 34540
first altboot we have done it no use
second :replace a harddrive reload firmwave ...
part number for the sbc single board controller
thanks
machine kept restart on its own ,,,the question is i can not reenter diagnostic mode turn on the machine ,near network cable , a red number and character 09u cd fa ca ca ca ca c a.. when load ui...
keep repeat reboot action ,hearing output tray action ,and machine status lite on do startup action and warning dont push start botton machine do the repeat startup action